If we talk about the best networking devices in the WiFi industry, TP-Link repeaters are sitting at the top. This is why people all across the globe have been performing TP-Link repeater setup at their homes. But, seventy percent of those users have been complaining about facing issues while performing TP-Link repeater setup. Are you one of those users? If your answer to that question is a yes, then worry not. Fortunately, you have come to the right place. Here, we have talked about different troubleshooting hacks following which; you will be able to get rid of the tplinkrepeater.net setup issues in a matter of minutes. Resolved: TP-Link Repeater Setup Issues
- Reboot Your TP-Link Repeater
Technical glitches are one of the biggest reasons why you are unable to perform TP-Link repeater setup. But, fret not. These glitches can be taken care of if you reboot your wireless device. Here is how you can reboot or restart your device:
- Power off your TP-Link repeater and unplug it from its wall socket.
- Wait for a couple of seconds.
- Plug your repeater back into its power socket and turn it on.
Now, try to perform TP-Link setup. Are you still facing issues? Well, follow the next hack.
- Check the Ethernet Connection
Have a look at the Ethernet cable connecting your TP-Link wireless repeater and your home router. Is it worn out from anywhere? Well, it looks like you have found another reason why you are facing the TP-Link repeater setup issues.
Therefore, either replace your Ethernet cable or consider connecting your devices with the help of a wireless source.
- Verify the Power Supply
Check the power socket into which your TP-Link repeater is connected. Is it damaged? Yes? You have two options to troubleshoot the issue. They are as follows:
- Get your current power socket repaired.
- Plug your repeater into a different wall outlet.
Done? Good. Now, try to perform TP-Link repeater setup. Are you still experiencing issues?
- Avoid WiFi Interference
Make sure that your TP-Link wireless repeater is not placed anywhere near cordless phones, washing machines, baby monitors, Bluetooth speakers, mirrors, microwave ovens, refrigerators, fish tanks, treadmills, televisions, aluminum studs, corners, concrete walls, and objects containing a large amount of water.
- Use Another Setup Method
If even after following the troubleshooting hacks mentioned above, you are stuck with the TP-Link repeater setup issues, it is recommended that you use another method to execute the same process. You can either opt for the WPS method or use the TP Link app.
Bonus Tip: Perform TP-Link Firmware Upgrade
In order to avoid technical issues with your TP-Link wireless repeater in the future, take our advice and update the firmware of your device.
Wondering how to update your device? Follow the instructions mentioned below and learn how to perform TP-Link firmware upgrade:
- Switch on your PC and access an internet browser.
- Navigate to the tplinkrepeater.net page.
- Log in to your TP-Link repeater using the default username and password.
- Once logged in, select System Tools > Firmware Update.
In this manner, you will be able to perform TP Link firmware update in a hassle-free way.
The Conclusion
With that, we are concluding our guide on resolving TP-Link repeater setup issues. We expect that after going through the aforementioned troubleshooting hacks, you are not able to set up your wireless device without facing any unwanted issues.
