Are you looking for a guide to configure wireless MAC filtering on your Linksys router? Well, doing so will allow you to permit or deny internet access to devices. Thus, by configuring a wireless MAC filter on your Linksys smart WiFi router, you can be assured about the security of the network. So, without any delay let’s shed light on the steps to configure the wireless MAC filter on Linksys WiFi router.
Steps to Configure MAC Filter on Linksys Router
You can configure the wireless MAC filter on smart router by accessing the Linksys router setup wizard. Walk through the below-mentioned instructions and learn how to do that with ease:
- Power Up the Router
- Find a wall outlet in your home near the modem.
- Plug your Linksys smart WiFi router into it.
- Set the Power button on the Linksys router to the ON position.
- Let the LED light stabilize.
- Connect the Router to the Modem
- Now, get hold of an Ethernet cable.
- Connect one end of the Ethernet cable to the router’s port and another to the modem’s port.
- Make sure that the connection is finger-tight.
- You can also opt for a wireless source to connect your Linksys router and the modem.
- Switch On Your PC
- Now, turn on your PC.
- Open a web browser like Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Internet Explorer, etc.
- Update the web browser if it is outdated.
- Access the Linksys Router Login Page
- Go to the address bar of the web browser.
- Type the default web address of your Linksys smart WiFi router.
- Press the Enter key.
- The Linksys router login page will come into view.
- Log in to Your Router
- Pick up the Linksys router user manual.
- Check for the default username and password.
- Enter the login details on the Linksys router login page.
- Click the Log In button.
- You will be taken to the Linksys router dashboard.
- Enable Wireless MAC Filter
- Now, click the Configuration tab.
- Locate the WiFi option.
- Select Wireless MAC filter.
- Check the Wireless MAC Filter box on the next window.
- Now, select the option whether you want to allow or deny access to devices.
- Click Wireless Client List and select devices.
- Now, choose the device to which you want to permit or deny internet access.
- Lastly, click the Save button followed by Close.
That’s it, you have now successfully configured the wireless MAC filter on your Linksys smart WiFi router. Now, you need not worry about WiFi leeching as only permitted devices will be able to access your Linksys router. But, do you know that you can also configure MAC filtering on your Linksys extender with the help of the router.
Now, let us guide you on how to set up MAC filtering on your Linksys extender using the host router.
Steps to Set Up MAC Filtering on Linksys Extender
- Find the Extender’s MAC Address
- Turn on your Linksys range extender.
- Connect it to the router using a wired or a wireless source.
- Open a web browser on your PC and access the Linksys extender login page.
- Log in to your Linksys range extender using the default username and password.
- On the Linksys extender dashboard, click Status > Device Info.
- Check the Extender MAC Address value of your Linksys device.
- Also, note down the MAC address of the devices accessing your Linksys extender.
- Set Up Wireless MAC Filter
- Now, access the Linksys router dashboard again.
- Navigate to the Wireless tab.
- Click Wireless MAC Filter > Enabled.
- Select the desired MAC filtering option in the Access Restriction section.
- Thereafter, enter the Linksys extender’s MAC address in the MAC Address Filter List section.
- Click the Save Settings button.
You have now successfully enabled the MAC address filter on your extender with the help of the Linksys router. However, you can’t do this without completing the Linksys extender setup process.
Final Words
And, with that, you have learned about how to configure Wireless MAC Filter on your Linksys smart WiFi router and the extender. Now, you can relax and enjoy performing bandwidth-hungry activities as intruders are at a bay.
Wrapping up the post with the hope that you will be able to configure a wireless MAC filter on your Linksys router as well as the sextender using the guidelines discussed above. What are your views on wireless MAC filtering? Tell us in the comment section.
