How To Change Water Filter In Samsung Refrigerator In Easy Way?


How To Change Water Filter In Samsung Refrigerator In Easy Way?
Spread the love

Have you lately found the red indicator after 6 months of use in the Samsung fridge? If so, know that it’s indicating either to reset or replace the water filter.

To do that, locate the water filter and simply remove it. Then, place a new water filter in the filter housing and reset the light by pressing the Filter Reset for 3 seconds. Next, dispense a few gallons of water.

If it seems hard now, take a deep breath. Let me help with how to change water filter in Samsung refrigerator by sharing the process in detail so you don’t make mistakes. Ready!

That’s How To Change Water Filter In Samsung Refrigerator!

Replacing the water filter in a Samsung refrigerator is a simple and effortless job that you can do in less than 5 minutes. You only need to get a decent and compatible Samsung refrigerator water filter to change it. Let me show you the procedure below:

1. Locate The Water Filter

First of all, you’ll need to find the Samsung refrigerator filter location. Based on the models of Samsung refrigerators, the spot of the water filter can be diverse.

In some fridges, the location is inside the Metal Cooling area covered in see-through plastic material (the area where ‘Express Water Filter’ is written).

See also  NASA releases first images captured by its most advanced James Webb telescope

Then again, you’ll find the water filter location on the front-right side of the Samsung fridge (below the area where ‘Turn until the icon aligned’ is written).

2. Remove The Water Filter

After you spotted the water filter location, it’s time to take out the water filter from the Samsung refrigerator. Here’s how to do it rightly:

Detach The HAF-CIN And HAF-QIN Water Filter

Start by, turning off the water supply of the area in the Samsung fridge. Then, pull up the water filter cover to access the old filter.

Give it a twist to the left while applying a slight amount of hand force to loosen it. Once it’s loose, go ahead and unlock the old filter. Carefully pull it out and take a quick peek at the area to see if any cleaning is needed.

Detach The HAFCU1 Water Filter

To begin the process, switch off the water supply and then open the fridge. Next, hold the old water filter and twist it to the left side. You’ll need to use some pressure when twisting it. After that, it should unlock. Take it out from the filter housing. Also, wipe the ice if needed.

3. Install The Water Filter

Once you have removed the Samsung refrigerator filter, install the new water filter. Be sure to check the user manual and learn about the procedure before you do anything. After that, try the given steps based on your model type:

Insert The HAF-CIN and HAF-QIN Water Filter

You’ll need to get the water filter (HAF-CIN and HAF-QIN models) and take out the white safety cover or cap from the top. Then, push it inside the water filter housing and turn it clockwise (right side).

See also  Bulk Mastercard Generator With Fake Details

Make sure it is nicely aligned and not loose in fitting. Also, ensure the lock symbol in the water filter should match the indicator line.

Insert The HAFCU1 Water Filter

Grab the water filter (HAFCU1 model) and take out its blue safety cap. After that, put it inside the filter housing in a standing position and twist it all the way to the right side. Check the notch at the top of the water filter which should match the arrow in the filter housing area.

Warning: Never install a 3rd party water filter to the Samsung refrigerator as it can get stuck inside the filter housing or won’t match the thread. In severe cases, it can harm the fridge.

4. Reset The Water Filter Light

To get your fridge familiar with the new water filter, you’ll need to reboot the water filter light. It won’t take more than 5 seconds in general.

You’ll need to unlock the panel (if it automatically gets locked after some while). Then, locate the Filter Reset button in the Samsung fridge’s control panel area.

After that, click and hold the button for 3 seconds or until you see the light resets. The filter icon should switch off or maybe change back to its usual shade after it resets.

Note: In some cases, you might need to press and hold 2 buttons for a few seconds to reset the water filter light. Be sure to check the manual before you reset.

5. Dispense Some Gallons of Water

To finish the process, you’ll have to use up about a few gallons of water using the new filter. The last step is crucial to ensure that your water is clean, pure, and free from any impurities.

See also  Elevating Marketing Efficiency with HubSpot Discord Integration 

You only need to turn on the water supply and dispense a few gallons of water. You’re doing a great job taking care of your health and your home.

The Bottom Line

The water filter needs to be replaced every 6 months of regular use. And to stay on the safe side, you should know how to change water filter in Samsung refrigerator.

Be sure to get the water filter from the Filter Appliance or other trustworthy online stores which offer good items that last longer.

Also, ensure to check the water filter after 6 months of use. That way you can tell whether it requires replacement or the red light indicating a problem.

Hope you find this handy and useful to get easily replace the water filter from the Samsung fridge. Get a clean water source through simple replacement!

Meta

Not sure how to change water filter in Samsung refrigerator? Then, check this guide as I’ll share the process of its replacement here!


Spread the love

Sikander Zaman
writing is my profession, doing this from long time. writing for many online websites one of them is scoopearth