LED lighting technology has come a long way over the past 50 years and is not only now commonplace in our home and commercial fixtures, but has also recently entered the lighting market. If you want to learn the ins and outs of this form of lighting technology, your first point of reference is our complete guide to LED stage lighting. Read on to learn more.
A light-emitting diode, or LED, is a tiny light bulb made of semiconductors through which you can now pass an electric current – which causes electrons inside the semiconductor material to be released and into what are called “electron holes”. Inside objects, and in the process of emitting light called photons. In fact, LEDs are just one way of converting electrical energy into light energy.
They do this well — in fact, compared to the old-fashioned incandescent and fluorescent lamps that have dominated the lighting industry for years, LEDs are energy efficient and durable — and therefore durable. In fact, due to their power and longevity, LED lights are considered one of the main solutions to reduce carbon dioxide emissions and prevent future environmental problems, including climate change, from damaging our vital planet.
In the 50 or so years since the first LEDs hit the market, these devices have come a long way. Thanks to Yellow River advancements in technology, LEDs have been used in all types of devices, in-home and commercial applications, and in all types of applications, including decorative lights, automotive and aircraft lights, tablet screens, TVs, cell phones – and more. Over the past decade In a period of time or so, LEDs have entered the film industry; LEDs are already some of the lighting fixtures on the platform.
Types of LED lights
They were the first LED lights to enter the field lighting industry, when a large 5mm/10mm light diode illuminated the “on” lights with motorized buttons in our appliances. These initial designs consisted of a line of red, green, and blue LED lines, randomly distributed to produce as much illumination as possible (red, green, and blue combinations produce white light, which is necessary for multi-dimensional illumination). While it wasn’t expensive and had low maintenance on power consumption (and heat), these first LED stage lighting systems didn’t look good, and they had poor light.
If you try to record it with the camera, it will always flicker on the screen, and the number of colors you can mix is very limited. However, they were the first step in further attempts and are still being developed in some places today. They are best used for party lighting, interior architectural lighting, and stage lighting where cameras are not available.
These are just some of the characteristics of the past, however, the lighting industry stage has shifted towards the best types of LED devices. The next major lighting spot for the next upgrade to mention is the 1 watt (and so on) LEDs in sequence (usually 36) – with these you can see the individual (different color) diodes, but they look much better than them. Older 5mm/10mm LEDs with significantly increased light output. High-quality units are also invisible when outfitted with video and video and creating beams that can combine many different colors.
However, despite its many advantages, you can see that any object you use to illuminate this lamp casts colorful shadows because these lamps are made after creating many small colors of different lights. Of course, the industry is very excited about these installations right now, forcing them to create a way to make led stage lighting look better and more uniform.
As we have seen, many lighting manufacturers were dissatisfied with the many colors created by these lamps, and with the fact that you can still see individual lines – and colors – in the lighting design. The basis was therefore laid for the modernization of homogenized or ‘incandescent’ LED stage lamps. Lighting fixtures with three-color LEDs incorporate a beautiful, interlocking lamp so that individual colors can be seen on the lens device.
Thanks to this development, even the fastest lighting manufacturers can enjoy the use of LED lights in their design steps. LEDs have three colors because they feature four LEDs (RGBA / W) as well as hex LEDs (RGBAW + UV) that allow you to mix and match more complex colors and shades. Existing measurements of three-, four- and hex LEDs in the field lighting industry; some of the best models out there right now are the Chauvet SlimPAR Quad 12, and the Chauvet SlimPAR TRI-12.
But this is not the end of it. If there is one thing we have learned in this post it is that time never stops until the stage light shines! Significant improvements in LED lighting are expected in the coming years. In fact, it already happens when we talk. A few years ago, we first heard about ‘Chip on Board’ LEDs, the LED light bulb promised more light and power than its predecessor and all in a small chip. Cheap, affordable, and versatile COB LEDs in many applications are already popular in many applications – soon you will start to see them again in the light stage.
Possibly, consistently, and the combined versatility of different colors, LED lights are an amazing way to illuminate and illuminate the stage, and as we have seen, technology is constantly changing in this area – so look forward to seeing even more. amazing light in the years to come!