Before choosing to replace your shingle roof, you should know the cost of the project. You should also know the materials you need and how to choose a contractor. Make sure to check the framing of your home, too, before deciding whether to replace the shingles. A properly installed roof can improve the curb appeal and performance of your home.
Table of Contents
Cost
The cost of shingle roof replacement varies greatly, depending on a few factors, including the size of your roof and the materials used. While the cost per square foot for a 30-year shingle roof maybe around $50, the cost of a 50-year shingle roof can run as high as $18,700.
Roofing contractors should be licensed, have a good reputation, and carry an active certificate of insurance.
The cost of shingle roof replacement can vary widely, depending on the type of materials used, the size of the roof, and the type of damage to the roof. You can also purchase a warranty for the materials, which may provide additional coverage.
Roofing contractors such as Chase Roofing can help you navigate the claims process with your home insurance provider and communicate directly with the profit adjuster. If you choose to purchase a warranty, you can enjoy a reduced cost.
Materials
If you are planning to replace your shingle roof, there are several different materials you can use. Asphalt shingles provide insulation and protect your roof against outside forces. Underlayment is used between the shingles and the roof and can be made of tar paper or felt. Other supplies may be required, depending on the details of your project.
Obtaining an estimate for roofing materials is easy if you measure the area of your roof and the slope of your roof. To calculate the cost of roofing materials, simply multiply the height of your roof by the number of square feet.
A class four shingle will withstand a two-inch steel ball bouncing off it. In contrast, a Class 3 shingle will only withstand an impact from a 1.75-inch steel ball. Additionally, a moisture barrier will prevent water from penetrating the roof.
This protective layer will be installed over the roof deck and under all other layers. The roof framework is made up of rafters – internal beams that extend from the eaves to the peak of the roof.
Choosing A Contractor
The most important step when deciding to replace your shingles is choosing a qualified roofing contractor. This contractor should be able to handle the entire job within your budget. You should invite at least three contractors to evaluate the condition of your roof and answer any questions you may have.
In addition, he should be able to answer questions regarding the type of shingles and their differences, whether you should choose a certain type of shingle roofing, and how the contractor will clean up afterward.
The experience and reputation of a roofing contractor are also important. A contractor with years of experience is likely to have handled many similar projects. Additionally, you should check their licenses, certifications, and insurance coverage.
You should also look for a listing with the Better Business Bureau (BBB). Be aware, though, that not all companies are members of the BBB, and some may have complaints. Nevertheless, if the contractor has an excellent reputation, he should be certified by the BBB.
Inspection Of Framing Before Replacing Shingles
Before installing shingles, you should conduct an inspection of your roof’s framing. Your roof inspector should check all of the shingles, flashings, vents, and gutters to determine if the structure of your roof is sound.
He should also check any structural issues, such as improper flashing installation. Because roofs get flooded by water, problems with flashing and placement can lead to major leaks.
During the roofing process, your roof replacement contractor will inspect the decking, which includes the sheathing and nails. If the sheathing is rotten, you will need to replace it.
The contractor will also check the wood sheeting and framing for cracks and rot. If these areas are weak, new shingles can shift and cause leaks. If you have damaged wood, you’ll need to re-attach the framing and nails.
Impact-Resistant Shingles
Installing impact-resistant shingles on a home or business roof can protect against storm damage and extend the life of your roof. These shingles are also sometimes referred to as IR shingles.
They can extend the life of your roof, reduce energy costs, and even qualify for a discount from homeowner’s insurance. Read on to learn more about this important type of roofing. Listed below are some of the benefits of impact-resistant shingles for roof replacement.
Impact-resistant shingles are designed to resist damage from hail and flying debris. They are rated Class 4 by the roofing industry and meet UL 2218 requirements for impact resistance. They are specially manufactured with rubberized asphalt that is bonded to the shingle.
This allows them to resist impact and damage from hailstones, which can travel up to 90 mph. The rubberized asphalt in these shingles also helps them withstand the impact of hail.
Cost Of Labor
The cost of shingle roof replacement includes the cost of removing the existing roof, which is usually included in the project’s total cost. The contractor may also arrange for a dumpster rental in miami on your property to be emptied of old shingles.
Some roofers charge up to $50 per hundred square feet for this service. The average price of shingle disposal is about $150. Some roofers choose to haul off old shingles on their own, while others arrange for a dumpster to be brought on site.
The cost of asphalt shingles ranges from $300 to $450 per square foot and includes the labor. Most shingle companies offer a limited lifetime warranty on their shingles, which can be valuable in case of a storm.
They also guarantee their labor, which is included in the price. Wood shake installation is slightly more expensive, but there is no tear-off needed with this type of roof. Depending on the square footage, the cost of labor for shingle roof replacement varies significantly.
