Are you struggling with a stripped screw that refuses to come out? It can be a frustrating experience, especially if you don’t have the right tools or techniques to remove it. But don’t worry; we’ve got you covered. In this article, we’ll show you how to remove a stripped screw with ease.
Table of Contents
Step 1: Assess the Situation
Before you start removing the stripped screw, you need to assess the situation. Look at the screw and try to determine the cause of the stripping. Was it over-tightened, or is the screw old and rusty? Knowing the cause can help you choose the right method to remove it.
Step 2: Use Rubber Bands
If the stripped screw has some space between the head and the material, you can try using rubber bands. Place a rubber band over the screw head and press down firmly. Then, insert your screwdriver into the screw head and turn it counterclockwise. The rubber band should grip the screw head and provide enough traction to turn it out.
Step 3: Try Pliers
If the rubber band method doesn’t work, you can try using pliers. Grip the screw head with the pliers and turn it counterclockwise. Make sure to apply steady pressure, so the screw doesn’t slip.
Step 4: Use a Screw Extractor
If the above methods fail, you can try using a screw extractor. A screw extractor is a tool designed to remove stripped screws. To use a screw extractor, you need to drill a small hole in the center of the stripped screw. Then, insert the screw extractor into the hole and turn it counterclockwise. The screw extractor should grip the screw and turn it out.
Step 5: Apply Heat
You can try applying heat to the stripped screw if all else fails. Heat can help to break the bond between the screw and the material. You can use a heat gun or a hairdryer to apply heat to the screw head. Once the screw is hot, use pliers or a screwdriver to turn it counterclockwise.
Conclusion
Removing a stripped screw can be a challenging task, but with the right tools and techniques, it’s possible. Whether you use rubber bands, pliers, a screw extractor, or heat, apply steady pressure and take your time. By following the steps that you will find on gardenfrontier.com
