Dry lining, also called ‘dry-walling’, is a type of cladding for internal walls to make them ready for painting or wallpaper installation. At times, it is also used for ceilings. It is called ‘dry’ because its installation requires minimal water, and so it needs little, in fact, no time to dry.
Unlike plastering, which is a slower process, dry lining is faster. In addition, it uses unique materials that help to save time and money associated with roof Brisbane Painters.
Table of Contents
What is a dry lining made of?
Drywall panels are pre-cut plasterboard pieces that are installed directly on interior walls or ceilings. The installation process is quick as the plasterboard can be cut as per the accurate dimensions of the surface. In addition, the plaster layer which remains at the core of a piece of plasterboard works as an excellent insulator. You can even get waxed, water-resistant plasterboard for dry lining systems in your bathrooms.
Why is dry lining required?
The dry lining makes a surface or wall ready for painting or covering using wallpaper. In addition, it is much faster than traditional plastering methods.
The plasterboard used in the dry lining helps to
- Conceal wires and pipes
- Create insulation space
- Provide sound boarding
Dry lining is also ideal for a variety of applications. It can be fitted to surfaces that have brickwork or rough finishes.
It can also be used to create curved walls, which enables creativity or help manage uniquely shaped or smaller spaces.
Nowadays, new properties are being constructed with stud walls to make separate living areas. Such walls can be made smoother, safer and firmer quickly by adding dry lining plasterboard.
Which materials are used in the dry lining?
Besides the plasterboard (available in different sizes, shapes, thicknesses, and types) that is fitted to get the smooth finish, many other materials are needed for different fixing techniques. These materials include nails, adhesives and screws.
To fit the plasterboards directly to the wall surfaces, contractors use dabs of quick-drying adhesive. The method is called ‘dob and dab’.
Plasterboards can even be attached to timber or metal wall surfaces using nails. This technique is called tacking.
Usually, though, screws support plasterboards much better than nails. This is also a possibility. This technique is called screwing.
To cover any nail heads or screws protruding, the contractors use a powder that is mixed with water and applied over them. Once the wet material gets dry, it is sanded to a smooth finish by the painting contractors Brisbane.
Jointing tape is used for covering the joints between the plasterboard sheets.
There are two standard thicknesses in the dry lining to choose from:
- 9.5 mm
- 12.5 mm
Like the ones used for ceilings, more giant panels usually use the thicker board to avoid sagging.
In all, dry lining is one of the most popular ways used in the construction process in the Australia. It is preferred by partitioners and builders to renovate premises for all types of properties. Well-known for its versatility and ease of construction, dry lining is widely used for residential and commercial properties.
