If your sump pump isn’t working, you may need to consider Sump Pump Repair. If you’re unsure of the problem, read on for a few basic tips to help you determine if your system needs to be serviced. Read this article to learn how to determine the cost of sump pump repair and how to resolve a variety of common problems. This article will also cover the various types of sump pumps and how to diagnose common issues, such as a clogged ejection drainpipe.
Table of Contents
Cost Of Sump Pump Repair
A good way to determine the cost of sump pump repair is to get multiple estimates from licensed plumbers and companies in your area. You should aim to get three or more estimates and look for companies with a good reputation and good reviews. You should also avoid hiring the first plumber you find who offers the cheapest quote.
Instead, get a detailed estimate and contract from each plumber and ask them questions to ensure that you are getting a fair price.
To assess the condition of your sump pump, inspect it regularly. Pay special attention to the location of the sump pit. If the pump is positioned too far away from the pit, the water may not flow properly through the sump. If the water doesn’t drain properly, you should call a plumber or a sump pump repair service. The pump’s motor should be replaced if it is more than ten years old.
Check for rust and other signs of corrosion on the pump’s parts. In severe cases, rust can develop on the motor and cause the sump pump to malfunction. To check if your pump needs replacement, pour some water into the pit to test its performance.
Types Of Sump Pumps
There are many types of sump pumps available on the market. These pumps are not electric powered and are instead powered by your home’s water supply. Each pump can move up to two gallons of water per minute.
When the water level rises in the sump basin, a pump starts to move the water out of the basement by creating suction. This action suctions water from the sump basin and discharges it outside.
There are two basic types of pumps: submersible and pedestal. Submersible pumps are submerged in the water and are therefore less prone to overheating. Pedestal pumps have their motors on top of a long tube and are ideal for smaller sump pits.
You can also purchase backup pumps, which will kick on automatically in case the primary pump stops working. These pumps are typically water-powered, although some models have a battery backup.
Float Switch Failure
One of the most common problems with a sump pump is a stuck float switch. This problem causes the pump to run continuously, vibrating while it runs. The float will not rise high enough to function properly, and it may be the result of old age or overuse.
A faulty float switch may cause the pump to run continuously, which wears down the motor. This problem is often a simple fix for a sump pump.
Float switch failure in sump pump repairs can be easily solved by replacing the float switch with an external one. This way, you won’t have to unplug and replace the pump. You can also use a piggyback switch to bypass the float switch and seal the sump pump’s housing. However, if the float switch still fails to function, it’s best to get it replaced.
Clogged Ejection Drainpipe
To start the process of repairing a clogged ejection drainpipe, remove the screen from the exterior of your home. Rinse the screen to remove any debris. Use a shop vac or small container to remove any excess water.
To unclog the pipe, lift the body of the sump pump and unscrew the drainpipe clamps. Then, push the blockage through the pipe with a plumber’s snake. If this does not work, flush the drainpipe with a high-pressure hose.
If you notice dirty water coming out of the sump pit, this could be an indication that your pump is failing. Not only is this an inconvenience, but it’s also a health risk. If you don’t deal with a clogged ejection drainpipe immediately, wastewater may back up into your home. In such cases, you’ll need to call a plumber as soon as possible.
Damage Caused By Rust
Assuming your sump pump is still functional, you may be surprised to learn that rust can actually be a problem. Rust is the result of iron bacteria living in the water. These bacteria can eat away at the components, leading to rust development.
When this occurs, water flow may become impeded or the pump may not function at all. If you notice signs of rust, it is time to call a professional sump pump repair service.
The rust will not only cause your pump to function improperly, but it can also cause the sump pump to fall apart. When the pump becomes too old, it may not be able to function properly, and your basement could flood as a result.
Fortunately, there are a few signs that indicate rust in your sump pump. If you notice any of these signs, you should replace them as soon as possible. Alternatively, you may opt for a pedestal pump, which will work if you have a rusting sump pump.
