In order to successfully strip powder coatings, you need to be aware of the process. The first step is to determine the amount of time needed to remove the powder coating. Often, the more time you need to strip a powder coating, the more expensive it will be. It is also important to wear protective clothing and equipment. You can also purchase paint strippers from a hardware store. Be sure to read the labels to ensure that they are safe to use. You can also check the trays for metal before you start removing the powder coating.
Another method of powder coating removal is abrasive blasting, also known as sandblasting. While this method is banned today because of the silica dust produced, it is still widely used as a general term. To find the best method for your application, consider the substrate and desired result. The following methods are effective for stripping powder coatings. If you’re using abrasive blasting, be sure to use proper safety equipment.
The most effective way to strip powder coatings is by media blasting. This method, also known as sandblasting, uses a chemical agent to attack the powder coating’s binders and particles. Unlike sandblasting, this method is non-toxic and can be performed on many surfaces, including steel and aluminum. However, it’s important to follow OH&S guidelines when using this method.
Mechanical methods are an effective option for powder coating stripping. Compared to chemical strippers, these methods are more efficient and save time. Additionally, they’re environmentally friendly because they don’t alter the substrate. And, unlike chemical strippers, the process is fast and easy, allowing for batch production. In addition, the removal process is quicker. A laser can help you get a smooth, shiny finish. There’s no need to use harsh chemicals, as it doesn’t affect the surface at all.
To strip powder coatings, you’ll need a tank with an immersion fluid and polypropylene-evaporation inhibitor floats. Mixing the two substances can be done without heating and can be more efficient for large-scale operations. Using a laser will not damage the surface of the parts. After removing the coating, you’ll need to rinse and dry them. You’ll need to remove the coatings with a special solution containing a pH-based solvent.
While traditional methods use high-quality solvents and chemical methods to remove the coating, the latter is a more environmentally friendly option. For example, D-Zolve(TM) 1012 dissolves powder coatings and does not require heat. If you’re concerned about the environment, D-Zolve 1012 is the best solution for removing powder coatings. These are safer than the traditional methods.
D-Zolve(TM) 1012 is a chemically-energized, water-based powder coating dissolver. It doesn’t need to be heated. Its acidic properties help dissolve the powder without removing the substrate. D-Zolve doesn’t require any pre-heating. It is suitable for most types of powder coatings and is available in a variety of sizes.
D-Zolve(TM) 1012 is a chemically energized powder coating dissolver that doesn’t require any heat. Its unique formula attacks the particles and binders of the coating. It is a great alternative to using chlorinated solvents and burn-off methods. The method is also environmentally friendly. You’ll be able to dispose of the ash without any problems.
If you’re planning to strip powder coatings in batches, you’ll need to apply a solution of potassium hydroxide or acetone. This will strip the powder from aluminum in a clean, safe manner. This solution is completely non-flammable and can be applied at room temperature. It doesn’t affect the substrate. The process is also safe. When properly applied, it will remove the most stubborn powder and make it easy for you to work. Thermal stripping uses high temperatures to dissolve the powder coatings. It’s a good option for parts that need to be stripped of the coating. The heat will also remove any residual ash. You can also use the abrasive blasting method to remove powder coatings from parts. This method may cause some ash to remain on the part. It will leave a surface profile that’s not suitable for further processing. Visit Solvent Replacement for Powder Coating Stripper.
