Painting your concrete flooring can be the ideal DIY renovation to update your garage, patio, or basement rapidly. Commercial painting in Melbourne is more easier than you may imagine, and it’s a great way to for add personality to your space.
When painting concrete floors, there are a few crucial factors to think about, such as the paint type you choose and the final appearance you desire. We’ll go through the fundamentals below, including how to paint concrete flooring in your house. But before that, let’s see –
How to Choose The Ideas Concrete Paint?
The first step is to select the best paint for the project if you’ve opted to use it. Epoxy or acrylic latex are your two choices for concrete paint.
- Water-based, acrylic latex concrete paint is easy to use. Most people feel fairly at ease using it because it applies similarly to any other regular acrylic paint you use at home or commercial space.
- Since epoxy concrete paint is weather resistant, significantly more durable, and produces a more expensive-looking surface, it is the most favoured option among professionals. It is more challenging to work with than acrylic latex paint, though, as you must first mix the epoxy compound before you can begin painting. Despite this, painters in Hawthorn say working with epoxy is still simple enough for do-it-yourselfers.
How to Paint Concrete Floor?
1. Test for Moisture
You might be tempted to start painting immediately, but if you want the job done well, you must do a moisture test first. Your concrete floor may still have moisture problems, which might cause the paint you apply to peel off or, worse yet, encourage the growth of mould, mildew, or algae.
To do the test, take a square foot of plastic wrap and tightly tape it with painter’s tape. Let it sit for 24 hours, then check whether any moisture droplets are caught underneath. If there are, the surface has to be thoroughly sealed before painting.
2. Clean The Concrete Floor
You must begin with a surface that is completely dry and clean. It can be one of the more labour-intensive components of the job because concrete floors are typically in areas that can become pretty dirty, like your backyard or garage.
Clean the floor thoroughly by sweeping off any dirt before using a mop to apply a concrete
degreaser that has been carefully made. After that, you’ll need to let the floor—including the lowest layers of concrete that aren’t visible to the naked eye—dry a lot. To hasten the process of commercial painting in Melbourne, fans and an open window are used to improve air circulation. Also, consider waiting for a few days to be sure.
3. Vacuum and Sand
Sanding and vacuuming are the following prep tasks. With a hand sander (believe us, you don’t want to do this without one), this will eliminate any unevenness in the concrete’s top layer. After you’ve completed sanding and the surface is as smooth as possible, use the wet/dry vacuum to remove all the sanding dust left behind.
4. Do Repairs
Before painting, patch any holes or cracks for the best effect. Even while it’s not required, it will give your paint job a lot more polished appearance and boost its endurance.
Depending on how much damage has to be repaired, you may need caulk, masonry crack filler, or a more robust concrete patch compound. Whichever route you choose, thoroughly read the instructions and give the product time to cure before priming and painting.
5. Clean The Floor
Like painting any other sort of surface in your space, primer is essential when painting concrete. However, according to painters in hawthorn, you should use masonry primer instead of regular primer since it is made explicitly for use on cement and concrete.
Apply the primer with a roller, allowing each coat to dry between applications for optimal coverage completely.
6. Blend Your Epoxy
This step may be skipped if you’re using acrylic latex paint, but if you’re using epoxy, you’ll need to mix it first. It should be carried out in tiny quantities for optimal results, and the paint with the hardener needs to be set.
For further instructions, refer to the epoxy paint instructions which you purchased. With some elbow grease and paint stirrers, you should be able to mix effectively, but if you have any questions about the procedure or need more direction, ask a professional for advice.
7. Apply Paint
It’s time to start rolling on the paint. Similar to how you used the primer, apply two coats and let each completely dry to get the best commercial painting in Melbourne result. Add a third coat if you’re unhappy with the coverage after two.
8. Use Masonry Sealant
The paint must then be sealed with masonry sealer as the last step. Once more, you’ll want a minimum of a few applications spaced out sufficiently to allow for drying. Follow the directions for curing times.
To protect yourself from fumes, wear your safety gear at all times. Additionally, you should let airflow enhance the environment and the painting process. Due to the several procedures, coatings, and drying times, this project may take up to a week, but the result will be worthwhile. For a long, you shouldn’t need to conduct touch-ups, but keep an eye out so you can spot-treat the floors rather than having to.
Contact Sunny Days Painting and Get Your Floors Painted Professionally
Being an expert at painting concrete floors is a talent that may improve the appearance and toughness of your space. You may turn a plain surface into a work of art using proper planning, skill, and materials. To get a faultless finish, consider prioritising surface preparation, choosing premium paints, and adhering to the instructions in this guide. A beautifully painted concrete floor may significantly improve the ambience in a home or business environment and leave a lasting impression on anybody who enters.
