If you are a new homeowner, you may have noticed that the tiles make a huge difference in how it looks. The grout, which fills in cracks and open spaces in your tiles once they are set, is another aspect of tile cleaning that must be considered. The term grout may be new to some of you. When two tiles are joined, cement and sand are put between them. Grout is incredibly porous and has the propensity to absorb moisture and water into its pores, just like natural stone does. As a result, there will be discolouration, mould, and stains.
However, the majority of homeowners largely ignore the grout. They think that simply washing natural stone is sufficient. However, if the mould on the grout is not entirely removed, it could quickly spread to the stone. As important as cleaning the natural stone tile is cleaning the grout. But many of you make mistakes when cleaning grout that worsens its condition. To avoid making mistakes, you can hire tile cleaning services Melbourne. Below listed are the 4 common errors to avoid while cleaning of tile grout cleaning:
Using too much water
The room where your tile is marked for visitors to observe is your living room or any other shared space. The following error you may make is using too much water while washing your tile and grout in light of these rooms. Water is a constant requirement for cleaning every surface in your home. Using excessive water could have the opposite effect of what you want. Using too much water will weaken the adhesive holding your tiles down, eventually leading to your grout falling apart. Your tiles will benefit over time if you use a regular cleaner like the P-M-C porcelain, tile and metal cleaner. Like bleach or ammonia-based cleaners, this solution dissolves mineral deposits from hard surfaces without eroding tiles. If you are unaware of the amount of water you need to use, you can look for tile and grout cleaning Melbourne services.
Cleaning tile and grout with muriatic acid and vinegar
Chemicals like muriatic acid are used in the industry for pool cleaning and other uses. It is a strong acid that can remove tough surface stains. However, tile and grout should be cleaned with something different than it. Using muriatic acid on tile and grout surfaces can permanently destroy the surfaces you are trying to clean because it is so powerful. Muriatic acid damage can be so severe that the tile may need to be replaced or regrooved.
Another ingredient that is frequently offered as a natural substitute for chemical cleaners is vinegar. Although vinegar has several purposes around the house, one does not include cleaning the tile and grout of a building. Although vinegar is natural, it has high acidity. Additionally, since grout is made of cementitious mortar, acidic cleansers like vinegar can dissolve it. The top layer of the grout will dissolve if you use pure vinegar on your tile and grout. Even though it may appear cleaner, removing some grout will make it worse, requiring an earlier regrouting.
Neglecting the instructions when using cleaning products
Is it necessary to use the entire bottle of the cleaning solution even if you eventually find it to clean single room’s worth of tile? Applying these cleaning chemicals according to the directions is important because it could protect your floor from harm. There are numerous alternatives available for maintaining and caring for floors. It is also essential to recognise that you have options, even if you decide to replace your floor tiles completely. There are specialists in various types of tile and flooring removal procedures in addition to custom flooring. Hire cleaning services in Melbourne to get the best outcome for your cleaning process and to avoid mistakes.
Using colored chemicals and coarse scrubbers
Grout can quickly become damaged and discoloured if you clean it with coloured chemicals. Because grout is porous, it may easily absorb any colours, including those from chemicals, changing its colour completely. Coloured chemicals can damage natural stone surfaces even if you have invested in the grout that matches the colour of the stone’s surface. Cleaning grout with bleach and baking soda also causes the grout to oxidise, leaving your grout with a very pale shade.
When caring for and cleaning tile and grout, coarse scrubbers risk blunting the surface’s natural shine. It is common to believe that rough scrubbers may eliminate surface-level dirt and hard-etched stains. But going with a non-abrasive scrubbing pad is a safer choice. A nylon brush works best for cleaning grout since it can remove dirt without harming the smooth surface. Before using a new cleaning chemical on your grout, you can also do some research on how to clean grout.
Maintaining the aesthetic of your home is essential to ensuring that it lives a long and healthy life since tile may enhance the appeal of any property. You can avoid the above-listed four common errors while cleaning tile & grout.
