Every buyer will ask before buying an air conditioner for their home or business if they should purchase normal or wool pads. Cooling pads are essential for cooling your air cooler, whether it is to cool a large area or commercial space.
Water Retention
Wood wool cooling media doesn’t retain much water. The cooler’s tank cools the incoming air by evaporating water from the wet wool. The cooling media retains water within the cooling chambers, so the air cools down quicker when it is pulled through them. Both cases are dependent on the quality of the cooling media. Evaporative cooling pads of high quality will provide superior cooling than wood wool pads.
Maintenance And Durability Of The Air Cooler Cooling Pad
Common wood wool pads will need to be replaced after one season. However, for more frequent use (e.g. in a shop or other hospitality establishment), it may be necessary to make two or three additional changes per season. Cooling pads will last for between 3-5 years and then need to be replaced.
Wood wool cooling pads cannot be re-used after a season. However, you can wash off cooling pad minerals and other debris to maintain their cooling efficiency. Gentle washing with a hose is enough to clean the cooling pads from time to time.
These are the main differences between air cooling pads for air coolers. Cooling padded coolers cost more than wood wool pads initially. The general cost of cooling pads is lower than wood wool pads due to their long life span and the need for frequent replacement.
What Are The Different Kind Of Cooling Pad Materials?
An Evaporative Cooling refers to a phenomenon where fluid vapor is circulated in the surrounding air. The liquid evaporates by trapping heat in the air. The Dry Bulb Temperature and Wet Bulb temperature can be used to determine the amount of water that has evaporated into the atmosphere.
Evaporative cooling uses less power than the usual strategy. The environment must contribute to greenhouse gas emissions and control.
An evaporative cooler unit consists of a cube of sheet metal with large vertical channel pads and an electric-engine driven fan. A water distribution framework is also included. As Pad materials, coconut coir, stainless steel, and wood wool are all possible.
Based on cooling effectiveness, water usage rate, and air velocity, the evaporative cool performed well.
These Are The Main Pad Materials With Their Most Prominent Attributes
Wood – The most well-known wood fiber pad is made from shaved Aspen trees. Aspen stands are preferred by some bog cooler owners because they provide the best balance of air and water. This allows for more air to flow through a cushion that is immersed, which results in cooler indoor air. Wood absorbs only one percent of the water. This prevents the wood from absorbing too much water. They are cheaper, have shorter lives, and require more support.
Cellulose- These pads are made from cellulose paper. Because of its thick material, it holds more water. This is a great option in dry situations where water can evaporate more quickly. Cellulose pads can be more expensive than wood.
The Role Of Cooling Pads In An Evaporative Cooler
- Because the cooling pads provide cooling, they are the core of an evaporative cooler.
- An evaporative cooler’s cooling pads allow water to flow through them.
- Pumps are used to pump the water through the pad.
- A fan blows on the pad when water passes through it. This releases the water-infused air into the atmosphere.
- Cooling the environment will be achieved by tiny water droplets that are evaporated from the air.
- The cooling pads do most of the work, so the electrical consumption of an electric cooler is very low.
