Wavlink extender setup through wifi.wavlink.com may seem pretty simple to you. However, it is a bit of a complex process. Even a single wrong or missed step can cause the process to halt, and you have to start from the beginning. To avoid having such a Wavlink Extender setup failure, you should now know the things to do and not to do when setting up your Wavlink extender.
Table of Contents
Don’t Ignore The User Manual of Extender
This is a common mistake made by most people. You must not be like them. Before initiating the Wavlink Extender Setup steps, it is advisable to go through the user manual of the device. It will give you all the information you need to begin the setup.
Do Check The Hardware of the Device
It is vital to check the hardware of the device. Examine both the extender and the router thoroughly. Their hardware should not be broken or defective. Give special attention to the wiring and buttons on both devices. If you found anything missing or not upto the mark, ask the manufacturer for a replacement before moving further to wifi.wavlink.com for Wavlink Extender setup.
Do Make Sure All The Devices Are Properly Connected
For the proper set-up of your extender, it is crucial to have a proper connection between the extender and the router. They should not be placed far away from each other. If you are unable to make a WiFi connection between them, use an ethernet cable. Plug one cable side into the extender and another end into the router. Additionally, your wavlink router setup should be properly executed.
Do Check The Power Adapter And Outlet
One of the first things to do is to check the extender’s power adapter and Ethernet cable. You should also ensure it is connected to your router and an outlet. Then, look at the lights on your extender and make sure they are all lit up. If any of these items are missing or damaged in any way, you will have trouble setting up your Wavlink Extender.
Visit For More Information: re-brostrend.com
Do Examine The Lights
For Wavlink Extender setup, you need to press “Connect” on both devices (extender and router). This will allow them both access so they can communicate with one another without issue. Make sure every light on each device has turned blue until they’re fully synced. Finally, check if there are any issues by checking out all available networks within range (both 2G/3G/4G bands)
Don’t Enter The Wrong SSID
When you connect your devices to a Wi-Fi network with internet access, then you have to open up My Devices in Windows 10 or Settings on Mac OS X. Thereafter, select “Network” from this menu and click “Add New”, then enter the SSID. Make sure you enter the correct SSID. Wavlink extenders are a great way to boost your WiFi signal. But they can also be tricky to set up, especially if you enter the wrong SSID.
Do Not Use These Channels
The Wavlink extender uses a frequency range of 2.4GHz, which is also used by many other devices like microwaves, Bluetooth headsets and wireless printers. To avoid interference with these devices and ensure that your extender works properly, do not use any other channel than 1, 6 and 11 on your router. If you are using any other channels for your home network, then change the channel setting of your router to one of those mentioned above, and it will stop interfering with your Wavlink extender setup.
Don’t Use Any Band Other Than 2.4 GHz
Do not use any band except 2.4GHz as this may lead to interference in signals between the extender and Wavlink Wi-Fi Router or other nearby Wi-Fi devices such as smartphones/tablets etc., which can result in poor internet quality while streaming videos online or playing online games with friends who live far away from you (or anyone else living near them).
Check The Extender’s Status
If it shows that everything is connected, that means your Wavlink Extender has been set up and configured correctly. You can now use it to extend your wireless router’s range. Additionally, check the extender’s network name. If you see “Wavlink” in front of any other letters or numbers, then this means that the extender was successfully configured and is ready for use.
Major Things to Do
- Check that the extender is plugged in.
- Ensure that the extender is plugged into a working outlet.
- Make sure you have a good internet connection and you do things in the correct way.
- Examine that you are within range of your router.
- Check that your Wavlink Extender is connected to your router by ethernet cable (or via wireless if applicable).
Major Things Not To Do
- Do not place the extender near a cordless phone, microwave oven, baby monitor, or other devices that use the same frequency as the extender. This will cause connection issues.
- Do not place the extender in a metal case or near a metal object. Either object might block the signal, resulting in no connectivity whatsoever!
- And finally…do not plug your Wavlink Extender into a power strip. Placing it inside an extension cord or even on top of one can cause interference with its WiFi signal and render it useless!
Some Tips and Tricks For Wavlink Extender Setup
- Make sure your Wavlink WiFi Extender is plugged in and turned on.
- Connect your Wavlink WiFi Extender to the same WiFi network as your Wavlink WiFi Router.
- Make sure that both devices are within range of each other.
To Conclude
The Wavlink range extender is a wireless device that can extend the range of your Wi-Fi network. It works by receiving signals from the main router, amplifying them and then sending them out over new frequencies. This makes it possible for you to get Wi-Fi coverage in areas where there isn’t any. But the Wavlink extender setup isn’t as simple as plugging it into an outlet and turning it on. You should do things before, during, and after installing your Wavlink device to ensure the best possible results from your new hardware investment. The main thing here is that it’s important to follow all instructions carefully so that everything works smoothly. We hope this article has helped you out!
