Are you facing the mywifiext.local not working issue while trying to access the Netgear EX6100 extender login page? If yes, then don’t panic. Nearly 60% of Netgear extender users have reported similar kinds of issues. In order to resolve the mywifiext.local not working issue, we have managed to get the basic troubleshooting hacks in this article. Just browse to the below section without wasting any more time.
Possible Reasons
Reboot Your EX6100 Device
In some cases, minor technical issues with your Netgear EX6100 extender might stop you from accessing mywifiext.local. Therefore, we suggest you reboot your Netgear extender. This might helps you in resolving the issue you are currently facing.
To reboot:
- Disconnect your Netgear extender from all your connected WiFi-enabled devices.
- Turn it off and remove your extender from the power source.
- Now, sit idle for some time before plugging it again into the power source.
- Next, switch on your EX3700 extender and connect your WiFi-enabled devices to Netgear_ext SSID to access the high-speed internet.
Now, check whether the issue still exists. If not, then browse to the next troubleshooting hacks.
Check the Power Supply
Sometimes, issues with your power socket can also be one of the reasons behind the outcome of the mywifiext.local not working issue. Therefore, consider inspecting the power socket through which your Netgear EX6100 extender is connected. If you detect any damage to the power socket, then try switching to another electrical socket to avoid an issue. Additionally, check the AC cable as it needs to be free from any damage for proper functioning.
Verify Your Internet Connection
There might be a chance that your extender device is not well connected to the internet. To confirm this, you are required to inspect the condition of the Ethernet cable while using a physical connection as any damage to the Ethernet cable can cause an issue. Therefore, you need to swap your Ethernet cable with the new one, if there’s any damage. If your networking devices are using a wireless connection, then the placement of your Netgear EX6100 extender should be within the range of your home router to avoid any loss of connection issues.
Use the Correct Web Address
Ensure that you are using the correct web address to access the Netgear EX6100 extender login page. Sometimes, users accidentally enter an incorrect URL in the address field and get stuck with an issue. Therefore, we suggest users to cross-check the web address they have entered before hitting the Enter button. Additionally, if you own a windows operating system, then mywifiext.local will not work for you as it is only compatible with MAC operating system devices.
Update Your Internet Browser
Upgrading the internet browser you are using to access the Netgear EX6100 extender login page can also help you to resolve the mywifiext.local not working issue. Therefore, browse to the setting of your internet browser and upgrade it to the most recent version.
Reset Your Netgear Extender
If none of the aforementioned troubleshooting methods help you in resolving the mywifiext.local not working issue. Then, resetting your Netgear extender to the default factory settings and reconfiguring it again is the last resort you can try to resolve the issue you are currently facing.
To reset:
- You need to find the Reset button located at the back of your Netgear EX6100 extender.
- Then, press and hold the button using a pin-pointed object until the power LEDs start blinking.
- Thereafter, your extender will automatically restart and will be restored to the default factory settings.
Once your Netgear EX6100 extender is restored to the default factory settings, now re-configure it by accessing the Netgear EX6100 setup wizard.
We hope you have managed to resolve the mywifiext.local not working issue with your Netgear EX6100 extender after implementing the aforementioned troubleshooting hacks. If you know any other way to fix the issue, then let us know through the comment section.
