The Internet could be hard to reach if the extender is running on the bad Setup. However, you are also a bit confused like many users of Linksys. We can resolve your Setup issues with setup techniques to troubleshoot the errors.
Table of Contents
Check These Points While Setup
Keep in mind to follow these guidelines for a good Linksys AC1200 setup.
- An access point is necessary for wireless setup.
- A cable like an ethernet is important if you are up for a quick connection.
- A WPS button is necessary on the extender for good Setup.
- A Proper configuration of the Networks is necessary.
- A computer, smartphone, or laptop, with a new processor.
- The brand of the router matters much in the compatibility of devices.
- If a router has the wrong configuration then there will be a bad connection.
- Make sure the antennas are located in the equally opposite direction.
- The reset button should not be broken.
- Full blinking Lights on the Extender.
- Do not shift the heavy objects near the extender.
The Positioning Of The Router
You are getting a bad internet speed at all times. The router position could be a problem so place the router position as recommended here to a place at some above space, on some wardrobe which is of middle size. If you start getting the best signal speed at a particular spot then only finalize the location.
Head Towards The Router
WiFi signals arise from the Linksys AX1800 setup itself. The near proximity of the devices helps in good Wi-Fi signal enhancement. Generally, if we talk about the office as well, it is the same. After that, you need a router to expand the range for sure. An extender is the one that pushes up the signals and extends them.
Make Sure You Might Not Run Out of Data
Check the monthly internet pack if you are not running out of it. Now, you can check how much GB is still left by the app provided by your subscriber. The internet speed might be getting deducted by the Internet Service Provider. Cut out the devices that are streaming a lot of data. You might want to keep some data for your daily use.
Number Of Devices
When we use the term device, it is related to the connected devices in connection with the extender and the existing Linksys router at the same time. Everything runs on the internet in the new era. From doorbells to smart locks. All these things just run on the internet. These devices consume a lot of bandwidth. For example- Cameras and smart TVs suck a lot of the internet. Check the number of people accessing the network.
Note: You can use extender.linksys.com to easily manage your device through the portal, for Linksys setup.
Restart Your Extender or Internet Connection
Before you do anything just restart your connection, for more guidance get help from your internet service provider. Try a device reboot though if you are up to any other experiment.
The following are two more pieces of information or setup techniques we would like to share with you. By which you can easily fix a lot of things including slow internet connection. Before fixing a slow internet connection You need to check a number of things.
Digital Interference
There could be different reasons behind digital interference.
There could be many reasons behind sluggish internet even wireless networks like satellites, and even cell towers might be causing the distractions.
The same device occurrence can cause interference in the range of the Wi-Fi device. Like many more Bluetooth devices, garages, microwave ovens, etc. 2.4 GHz is the frequency range that all these devices share along with the WiFi extender. So could lead to overlapping and cause interference. The less crowded band from both is the 5GHz one. As it is of the new technique.
Setup Linksys Wireless Extender Using WPS
You can also Wireless defended setup which actually makes it easier to connect your extender to your Wi-Fi network and with this you can also connect other devices. Click on WiFi defended setup in the Wireless setup runner.
- Start by pressing the click button and stay for the pop-up.
- Your Linksys router has a WiFi setup button that you can press and hold.
- Once the connectivity happens the LED of your Linksys extender will turn solid. To connect with both bands on a binary-band router, you must do WPS twice.
For better performance of the extender, we recommend you upgrade with the new technology that comes every day. Therefore the above given Linksys AX1800 setup is very good and helpful. However, if you are looking for more guidance with your device setup or troubleshooting, get in touch with our team of tech experts.
