A blocked drain is a prevalent problem in both building owners that requires immediate attention from a plumber. Such issues, if addressed slowly, might eventually become troublesome and need costly drainage system repair or replacement.
It is possible to treat many ailments at home using home remedies. Before calling on a plumber, try each one: boiling water, natural cleaners, acidic cleaners, plungers, DIY drain snakes, CCTV, hydro jet, excavation, and pipe relining.
- LEAKS
Leaks can occur anywhere in a plumbing system. Leaks may cause structural damage to a house or company by rotting out floor beams and wall framing over time. Plumbing leaks can damage the supporting soil or concrete. Underground leaks can cause foundation damage.
Pipes that are sagging, drooping, or bending hinder free water flow. These damages can destroy vital support structures that plumbing systems rely on. These are some steps to fix this problem.
How to fix it:
- Step one: Thoroughly dry the area. A heat gun will aid in the evaporation of moisture. Cut a tiny piece of sandpaper and rough up the leaking region of the pipe. You should use alcohol to clean the area. Purchase some special adhesives designed for use on water pipes. Apply a thick glue coating, pressing it as far into the leak’s seam as possible. Turn off the water for 12 hours. Most glues will reach their maximum strength within 24 hours.
- Step two: Purchase some putty designed to stop water leaks. Sand the area with sandpaper before cleaning it with alcohol. Follow the manufacturer’s instructions for mixing and applying the putty. Pour no water down the drain for the period to allow the putty to cure.
- Step three: Purchase a roll of fiberglass-resin tape. Soak the fiberglass-resin video in a pail of water directed by the tape maker. Wrap the tape tightly around the leak. Allow the tape to cure according to the manufacturer’s instructions.
- Step four: You might use Cold-weld adhesive. This compound is available as a two-part liquid epoxy or putty that must be kneaded before application. You must work swiftly with this cold-weld adhesive. Rough up the area using sandpaper, then thoroughly clean it with alcohol. Follow the directions on the cold-weld adhesive package. You must apply it once the chemical reaction has begun and the mixture has heated.
- FOOD CLOGS
Food blockages are most common in kitchen sinks and occasionally in toilets. In these cases, someone attempted to flush or dispose of food items too oversized for the pipes and pipe apertures.
How to fix it:
- Examine manually: look inside the disposal to see what is causing the obstruction. To locate the blockage, use a flashlight and pliers or tongs. Insert the pliers or tongs into the device and remove the loose object. Repeat until you have removed every entity or quantity of muck from the disposal.
- Vinegar & Baking Soda: Baking soda and vinegar are excellent home treatments. This effervescent foam mixture removes food blockages and cleans the equipment. This solution effectively unclogs grease, fat, and oil and deodorizes stinky trash disposal. Pour baking soda into the garbage disposal to begin. Pour vinegar down the trash disposal next. Wait 20 minutes for the fizz to dissolve the obstruction. Finally, flush the combination and food waste with hot water.
- Plungers: A plunger relies on water pressure to push tough clogs down the pipe drain. By plunging up and down vigorously, the clog will loosen and move.
- Call a professional: If required, a plumber with clog removal skills can uninstall and replace the garbage disposal to clear obstructions, including removing, cleaning, and replacing the P-trap connecting to the disposal beneath the sink. You should research to find the top regional professionals who handle such matters. This may be simple if you live in Texas; an excellent sewer line repair company may assist you.
- OBSTRUCTION OF TREE ROOTS
Tree roots are less prevalent than other reasons for clogged drains, yet they create plumbing issues. Tree roots can develop to cross with existing underground plumbing lines over time. These roots can bend and shatter plumbing lines, resulting in massive leaks and disastrous complete drain obstructions.
How to fix it:
- Unless you are a professional, you will need to contact a professional plumber to remove them and restore your water flow. Plumbers are qualified and have access to instruments such as electric drain snakes and hydro jet drain cleaners, which may quickly cut through your tree root problem. The electric drain snake will physically cut and remove the tree roots, whilst the hydro jet will blast the roots away with high-pressure water.
- DISINTEGRATION
Pipe disintegration is possible, especially in older homes or residences with deteriorating concrete, clay, or terra cotta pipes. Joints might separate and sink, and the earth can erode, causing the tube to droop.
Pipes may move under the continual pressure and heave of the freeze-thaw process in areas where it freezes heavily in the winter. Even with contemporary lines, often composed of super-hardened plastic, damage from natural soil shifts and seasonal fluctuations is likely.
How to fix it:
- The best solution is to call a professional because this is a problem that you cannot address on your own and requires an expert to locate the problem to remedy it.
- PET LITTER
Although less prevalent than other clogs, Pat litter is nonetheless included on this list. Many pet owners believe flushing their cat litter is the safest way to dispose of old rubbish.
Septic and sewage systems, on the other hand, are not built to manage cat litter. As a result, litter clogs drains and u-bends readily.
How to fix it:
- Pat litter, like other clogs, requires the exact solutions discussed above, or you can hire a professional to care for it.
Conclusion:
As you already read, some of the mentioned problems have simple solutions. But you should be sure what the problem is before applying any solutions. Calling a professional is always the best idea when trying to figure out the problem.
