An HP printer printing blank pages is one of the most common printing problems. There can be various reasons behind this problem, such as incorrect printer settings, outdated or corrupted printer drivers, etc. However, you can easily fix this problem by following the troubleshooting steps given below.
Troubleshooting Steps to Fix HP Printer Prints Blank Pages
- Check the Printer Settings:
The first thing you need to do is to check the printer settings. Ensure that the printer is set to print clearly in black and white. Sometimes, the printer may be set to print in color mode, which can cause it to print blank pages.
- Update or Reinstall the Printer Driver:
Another reason for HP printer printing blank pages can be an outdated or corrupted printer driver. You need to update or reinstall the printer driver in such a case. You can do this by visiting HP’s official website and downloading the latest driver for your printer model.
- Clean the Print Head:
If the print heads in your HP printer are dirty, this can cause the printer to print blank pages. You must clean the print head if the above steps don’t work. This should be possible by utilizing a cotton swab plunged in refined water.
- To start with, switch off the printer and turn it off from the electrical plug.
- Then, remove the ink cartridges and clean the print head with the cotton swab.
- Once done, reinstall the ink cartridges and plug in the printer.
- Turn it on and try printing a test page.
- Perform a Hard Reset:
If the above steps don’t work, you must perform a hard reset. For this, you need to turn off the printer and unplug it from the power outlet. Then, remove the ink cartridges and disconnect all the cables attached to the printer. Wait for a few minutes, reconnect all the cables, and install the ink cartridges. Finally, turn on the printer and try printing a test page.
- Check the printer’s ink levels:
One possible reason for your HP printer prints blank pages is that it is out of ink. Check the ink levels in your printer and refill or replace the ink cartridges as needed. To do this,
- Click the Start button, and then type Devices and Printers in the search box.
- Click Devices and Printers.
- The Devices and Printers window opens.
- Right-click your printer icon, and afterward click Properties.
- Tap the Maintenance tab then click View printer status.
- Check the estimated ink levels to see if any of the cartridges are low on ink.
If any cartridges are low, click the link under Ink Levels to order new cartridges or contact HP customer support.
If you see a message saying the printer is out of paper, click the link under Printer Status to open the print queue and check for any jammed paper.
- Replace the print cartridge:
In some cases, you might need to replace the print cartridge. To do this,
- Switch on the printer, then, at that point, open the top cover. The print carriage moves to the center point of the printer.
- Wait until the print carriage is idle and silent, and then lightly press down on the top of the ink cartridge to release it.
- Pull the ink cartridge out of its slot, and then remove the new ink cartridge from its packaging.
- Insert the new ink cartridge into its slot, and then push it forward until you hear it snap into place.
- Close the top cover.
- If you are prompted, print a calibration page.
- Contact HP Customer Support:
If you face any problem so, you can easily connect with our technical team, they will be able to help you troubleshoot the problem and get your printer up and running.
If your HP printer is printing blank pages, these are a few things you can do to fix the problem.
Conclusion
You may wonder what to do if your HP printer prints blank pages. First, ensure that the printer is properly connected to your computer and that all cables are secure. Then, if it is still not printing correctly, try reinstalling the printer software or updating the firmware. Finally, if none of these steps work, you may need to replace the print cartridge(s). We hope our tips will help your HP printer back up and running smoothly!
