Wyze camera error code 90 is a common problem many users face. This error code usually indicates that there is a problem with the camera’s connection to the Wi-Fi network. If you encounter Wyze error code 90, don’t worry, as several simple solutions can help you solve this issue.
Table of Contents
Check your Wi-Fi signal strength:
You should first make sure your Wi-Fi signal is strong enough to support the camera. Place your camera near the router and check the signal strength on your phone. If the signal strength is weak, try moving the camera closer to the router or installing a Wi-Fi extender to improve the signal.
Restart your router:
If the signal strength is good, but the camera still gives you error code 90, try restarting your router. Turn off the router, wait for a minute, and then turn it back on.
Update the camera’s firmware:
Outdated firmware can cause compatibility issues with your router, resulting in error code 90 Wyze. To fix this, go to the Wyze app, select your camera, and look for the firmware update option.
Factory reset the camera:
If the above steps do not work, try factory resetting the camera. Hold the reset button on the back of the camera for 10 seconds to do this. Then, set up the camera and connect it to your Wi-Fi network.
Check for network conflicts:
Other devices on your network can sometimes interfere with the Wyze camera. Try turning off other devices on your network, such as smart home devices, to see if this resolves the issue.
Contact Wyze Support:
If you need help with the above solutions, you can contact Wyze support for further assistance. They will be able to help you troubleshoot and solve the issue.
Change your router’s channel:
Interference from other Wi-Fi devices can cause connectivity issues for your Wyze camera. Try changing your router’s channel to see if that resolves the error code 90.
Check for any firmware updates for the router:
Similar to updating the camera’s firmware, ensuring that your router has the latest firmware can also resolve compatibility issues. Check the manufacturer’s website for any available updates.
Disable 5GHz Wi-Fi:
Some Wyze cameras may not be compatible with 5GHz Wi-Fi, so try disabling it on your router and connect the camera to the 2.4GHz network.
Disable VPN or proxy connections:
If you’re using a VPN or proxy connection, it can interfere with the camera’s connection to your network. Try disabling these connections and connecting directly to your Wi-Fi network.
Replace the camera:
In some cases, the error code 90 may be caused by a hardware issue with the camera. If none of the above steps work, consider replacing the camera.
Conclusion
Wyze Camera Error Code 90 can be frustrating, but several steps can be taken to resolve the issue. Try the steps above, and if none work, reach out to Wyze support for further assistance. With these tips, you should be able to get your Wyze camera up and running again in no time!
If the problem persists, reach out to Wyze support for further assistance. By following these steps, you should be able to determine the error code 90 and get your Wyze camera up and running smoothly.
