Have you changed the default admin password of your Netgear wireless range extender and enabled the password recovery feature? Well, the good news here is that after enabling this feature, you can easily recover your admin password if you ever forget it.
Note: However, if you did not set up password recovery and end up losing your password, then you need to reset your Netgear extender.
How to Recover Netgear Extender Admin Password?
Walk through the instructions mentioned below and learn how to recover your password to access the Netgear wireless range extender:
- Power on your Netgear extender after plugging it into a wall socket.
- Take an Ethernet cable.
- Connect one end of the cable to your extender and another to your home router.
Note: The cable that you have used to connect your WiFi devices should not be damaged.
- Open your computer.
- On your computer, open an internet browser as per your preference.
- In the address field of your browser, enter mywifiext local.
- Press the Enter key.
- You will find yourself on the Netgear extender login page.
- Thereafter, you will be prompted to enter the default username and password.
- Click the Cancel button.
- If password recovery is enabled, enter the serial number of your Netgear extender.
- You will find the serial number of the product label.
- Click the Continue button.
- Answer all the security questions.
- Click the Continue button again.
- A screen will appear displaying your recovered password.
- Click the Login Again option.
- A login screen will come into view.
- With your recovered password, log in to your Netgear range extender.
If you follow these step-by-step instructions with your eyes open, you will surely be able to recover the admin password of your Netgear range extender via mywifiext. However, if you do not, then, unfortunately, you need to walk through the below-mentioned solutions.
Can’t Recover Netgear Extender Admin Password?
- Restart Your Netgear Extender
The easiest way to get rid of the issue that you are facing at hand is to reboot or restart your Netgear wireless range extender. Yes, it is a very simple hack; however, it is very effective. Thus, follow the steps mentioned below and learn how to reboot your device:
- Disconnect your Netgear extender from the host router and turn it off.
- Unplug the wireless range extender from its wall socket and hold on.
- Once the wait is over, plug your extender back into its wall socket and turn it on.
- Do not forget to re-connect your Netgear Nighthawk extender and home router.
As soon as you are done rebooting your wireless extender, check whether you are able to recover the admin password. If not, it’s time to perform Netgear wifi extender factory reset.
- Perform Factory Default Reset
Walk through the following guidelines and get to know how to restore your Netgear wireless range extender to its factory default settings:
- Look for the Reset button on your Netgear extender.
- Once found, carefully press it, and wait for about a couple of seconds.
As soon as you are done resetting your wireless device, perform Netgear WiFi extender setup right from scratch.
Leave a Feedback!
If after following the guidelines mentioned in this post, you were successfully able to recover the admin password of your Netgear wireless range extender, it is recommended that you do share your feedback with your fellow readers. Surely they will be happy about your success.
