The Australian Standard AS3600 and the National Construction Code 2019 regulate the construction of concrete structures in Australia. This is important because a concrete pathway can protect underground services. An improperly constructed concrete driveway can crack, deteriorate prematurely, and even cause damage to the property. To ensure the safety of your family and property, it is important to follow the Australian standard for driveways. For more information, visit the Australian Standards website.
The National Construction Code 2019 and Australian Standards AS3600 govern the construction of concrete structures in Australia. Concrete pathways protect underground services, and the thickness of a driveway slab should be 100 mm or greater. Incorrectly installed concrete companies can lead to early cracking and deterioration, and damage to the property. A concrete driveway is one of the most important investments you can make. Follow these tips to ensure your driveway will stand up to heavy vehicles.
When preparing your driveway slab, consider heavy traffic. For vehicles less than three tones, a minimum thickness of 100 mm is required. It is also important to apply a sealer to prevent fading or staining. In addition, ensure that the slope of the driveway is adequate. Using a slope will prevent the slab from sinking and will improve drainage. Once your driveway is installed, contact a concrete contractor to maintain it.
Adequate surface drainage
The drainage of water from concrete driveways is of the utmost importance. Water must drain away from the driveway, so that it does not flood and cause soil erosion or pollution. Adequate surface drainage means a cross slope of at least 2 percent. There are two basic types of drainage: valley and crowned. Valley drainage drains water to the sides and downhill, while crowned drainage drains it to the center. Both types are acceptable for driveways, but are not recommended for areas where the driveway crosses public sidewalks.
The National Construction Code 2019 and the Australian Standard AS3600 provide standards for the construction of concrete contractors structures in Australia. It is also imperative that driveways are properly installed and maintained. Improper installation of a driveway may lead to structural failure and premature cracking. The correct installation of a concrete driveway is essential for the safety of occupants and property. If installed incorrectly, driveways can crack and degrade prematurely, resulting in substantial property damage.
Mesh reinforcement
While residential projects don’t usually require steel mesh reinforcement, the use of steel reinforcement on driveways is a smart idea. This material adds additional support and strength to the concrete and makes it more durable, particularly for heavier vehicles that back up or turn. Listed below are some reasons why mesh reinforcement is useful in driveways. Let’s take a closer look. When choosing a concrete driveway reinforcement, remember to consider the ground underneath.
Mesh reinforcement in concrete driveway contractors can be either rectangular or square. Rectangular steel mesh is commonly used in concrete slabs in warehouses, industrial sheds, tilt-up slabs, and residential buildings. Trench mesh is a long, thin strip of steel mesh that’s ideal for residential applications. Ute mesh is suitable for Utes as its small enough to be handled by one person without risking an injury.
Conclusion
A concrete driveway should have a suitable slope. It should be sloped away from the building, or at least a minimum of an inch from the structure. If the slope is too steep, water may accumulate and cause damage. For concrete driveways up to 4 feet wide, a slope of one inch away from the home is ideal. For perpendicular walkways, a one-quarter inch slope per foot of length should be used.
