Thanks to the use of new types of heating elements, electric stoves are becoming more and more popular. Indeed, in terms of their characteristics, They are just as good as, and often better than, traditional gas stoves.
Therefore, if the electric stove does not heat up, you need to contact specialists because it is very difficult to perform Samsung stove repair in Calgary on your own since this will require not only quite rare spare parts and special devices but also the ability to understand electrical circuits.
The burner of the electric stove does not heat or weakly heats
Quite often, it is possible to visually determine the cause of the electric stove not heating up. To do this, carefully inspect the electrical socket, cord plug and connecting cable for “burnt out,” melted or damaged insulation and the wire itself. It is also necessary to pay attention to the controls’ appearance and ensure that no water or food residues have got on or inside them.
If the electric stove is not heated, the burner does not turn on, and none of the indicators do not light up, first of all, it is necessary to check whether electricity is supplied to the socket. To do this, simply plug in another electrical appliance in good working order. If it works, then the cause should be sought in the stove itself from https://cecj.be/wp-content/slot-gacor/.
Often the induction hob does not heat up because of the wrong cookware. The user manual states that the bottom of the cookware to be placed on the stove must be made of “magnetic” material.
Sometimes the stove heats up poorly due to low mains voltage or when several powerful appliances are switched on at the same time. Eliminate this cause by leaving only the electric stove on. The most common breakdowns include the following:
- burnout of one or all the spirals of the burner;
- thermal protection trip or a blown fuse;
- breakage or debris in the power switch;
- malfunction or failure of the control controller.
Below we will describe the main breakdowns due to which the electric stove does not heat up and consider ways to eliminate some of them.
The burner coil burned out
Among other failures, this fault is more common than others, especially in models which use heating elements made of nichrome threads. It will most likely not be possible to restore the performance of such a burner, so it is replaced with a new one with similar characteristics and dimensions. Sometimes one faulty burner can lead to the failure of the entire stove.
Many types of burners have several spirals, and only one of them can burn out. Because of this, the electric stove does not heat well.
To check the working order of the heating element, use a tester or multimeter in ohmic resistance measurement mode. If all the coils “test” and the burner does not heat up, the cause should be sought in other components of the electric stove.
Remember that before you “open” the case of an electric stove, you must de-energize it by pulling the plug out of the socket.
Thermal protection has tripped
Overheating protection is provided for each burner of all types of electric stoves for safety reasons. If the surface temperature exceeds the permissible value, the electricity supply circuit is interrupted, and the burner stops heating. Almost any component can be the culprit of the breakdown:
- Temperature regulator;
- Сooling fan;
- The heating element itself.
Sometimes the protection can also trigger due to prolonged continuous use of the burner. To determine the cause of the thermal protection activation, it is better to invite a Samsung stove repair specialist in Calgary, as it will take time to find out on your own.
Broken power switch
Usually, with such a breakdown, there is no heating of only one burner. However, it can work in some switch positions. Usually, burnout of the burner spiral also manifests itself in the same way, but after the normal results of “ringing” the burner with the tester, they indicate precisely the switch malfunction.
Because the switch handles relatively large currents, its contacts can burn, and constant operation at high temperatures can “relax” the springy material of the contacts. If one or other specific burners began to heat up weakly, then the “missing” contact in the switch connecting part of the spiral is often the culprit.
Control module failure
If the electric stove heats up poorly and shuts down after a while without reaching the desired temperature (most often one of the burners), the culprit may be a broken thermostat or sensor. Lack of temperature control leads to forced shutdown of the stove by the control controller.
