Pool resurfacing is a term used to describe the process of resurfacing your pool entails draining it and rebuilding the surface layer between the shell and the water. Time, weather, chemicals, water level, and other factors can all contribute to the pool’s surface degeneration and eventual replacement. Even with appropriate upkeep, a pool’s surface will need to be replaced every ten years, so keep this in mind when planning your pool budget.
When Should You Resurface Your Pool?
A pool should be resurfaced every 10 years or when it needs repair, as a general rule. Aside from age, there are a few symptoms to look for that suggest it’s time to resurface your pool, including:
• Stains
Stains form as a result of dirt, debris, chemicals, algae, and other factors, but if you can’t get rid of them or they keep reappearing, it’s an indication your pool needs to be resurfaced.
• Marks of Erosion
Water will gradually wear away at the surface of your pool as it rolls against it, leaving stains and rough places. While keeping your pools chemical balance in check will help reduce erosion, if you notice erosion marks around your pool, it’s time to resurface.
• Rust
If you discover rust spots in your pool, it’s a sign that the rebar in the shell is starting to oxidize, and while you can patch these locations, it’ll only be a temporary cure. Rust stains will spread throughout the pool, so if you notice rust stains, it’s time to resurface.
• Discoloration
You had a gorgeous blue-colored finish when you first had your pool installed, but now you’ve noticed it’s faded and has streaks and patches of white. Unfortunately, as the plaster begins to fade with time, this is an unavoidable symptom of your pool’s age. The only option to restore the vibrant color is to resurface the pool.
• Difficulties
It’s time to resurface your pool if you discover that the surface is no longer smooth and feels like sandpaper. The chemicals you use to maintain your pool clean will eat away at the surface, turning it from a smooth, pleasant surface to a rough, unpleasant one.
• Loss of water
If you discover that you’re filling up your pool more frequently than usual, it’s a sign that there are fractures in the pool’s surface. These flaws can be microscopic and difficult to see, but if you have to repeatedly replenish your pool, it’s time to resurface it.
What Is the Average Time to Resurface a Pool?
It’s critical to understand the stages involved and how long they’ll take once you’ve decided it’s time to have your pool resurfaced and have chosen the material for the resurfacing.Pool resurfacing properly is a multi-step operation that can take anywhere from 9 to 14 days, depending on the size of the pool, the extent of the damage, and the weather. The steps for pool resurfacing are as follows:
Chemicals must be avoided.
You must stop using chemicals to treat the pool one week before draining it. Stopping the use of chemicals in the water will make it more environmentally friendly and safer to discharge.
Drain
The pool must be completely drained before the resurfacing work can begin. This process may take more than 14 hours to finish.
Preparation
After the pool has been emptied, work on the resurfacing will begin. This process entails removing the old material and prepping the pool for new material installation.
Sealing
Following the removal of the old material, you must seal all of the piping to ensure that the pool is waterproof before applying the finishing material.
Installation of Materials
You must select and apply the new material once the sealing procedure and pool preparations are complete. This is where you’ll start to notice your pool’s new style.
Fill
It’s time to fill the pool with water after the new material has been installed. It’s critical to keep a close eye on the pool as it fills up with water and turn it off after the water reaches the tile’s waterline. If you turn off the water too soon, it can leave a permanent ring around the pool. Once the pool is filled with water, make sure no one (even dogs) tries to swim in it.
Conclusion
Pool ownership entails a great deal of responsibility, including regular maintenance. Resurfacing is a vital maintenance process that your pool will require. You should expect this process to take place every 10 years or sooner if you want to change the pool’s aesthetics or style. Resurfacing is a time-consuming process that is required to maintain your pool looking and performing at its best.
