fbpx

Tips About Sanding and Refinishing Hardwood Floors


Refinishing hardwood floors and sanding them yourself will save you money. Even an inexperienced homeowner could do a better job than a handyman who offers the lowest price. Understanding the basics is key to a high-quality final product on your wood floor.

It’s all about aesthetics. Your floor will look amazing and will be something you are proud to display. Then your children or dogs will see it and will ask for more.

For this, you should search for retail flooring stores which can provide you with better quality products.

The first step in creating a perfect wood floor is floor preparation

After you have moved everything to the floor, sweep it and vacuum it. Next, wipe it with a moist cloth and dry it. You should ban everyone from the room. The worst thing is to get a lot of grit in your disc, belt, or sanding pad and ruin the beautiful wood floor that you are trying to make.

Next, you should get down on your knees and run your fingers across the floor.

After you are certain that your floor is safe, clean, and in good condition, you can decide which type of sander you want to rent. Safety first!

Sanding wood floors: Techniques

First, follow the grain. Second, after each stage, take a quick glance around to make sure you haven’t missed any scratches from the previous. After you have completed a 120 grit pass you can wet it (this will bring up all fibers). Then wait for it to dry before you do another 120 screens. If you see swirls, marks and scratches, continue to work. The golden rule is to move up a grade, then start over again. It will look ten times worse if you can’t see it before it’s done.

See also  How to Find Best Options When Looking For a Rental House in Nairobi

It may seem like skipping a step is a time- and material-saver, but it’s not. You will waste a lot of time trying to smooth out ridges using a paper that is too fine for the job. It often clogs the surface before it can cut the surface.

The only thing you can skip is the first paper you choose. You may be able to start at 60 if the floor is very uniform. The quality of the floor and the time it takes to install it properly will determine how long you spend there.

You can expose any cut corners if you stain your floor. Any flaws and scratches will be made more obvious by floor stains.

As mentioned, you should always wear adequate protection against breathing dust particles, especially when you are working on old floors that have a finish. You can use small paper masks to protect your eyes, but they are not very effective. Although it can be uncomfortable to wear in hot temperatures, a respirator is an excellent idea to protect your lungs.

A broom, dustpan, and ideally a shop vacuum are all you need. Use soft bristles on vacuum attachments, as hard plastic can leave marks across the floor. You can also vacuum with the grain to reduce visible marks. Make sure to vacuum as much dust as you can. If your floor has nailed planks, make sure that any nails heads are below the surface. Otherwise, they will rust and leave stains.

Hybrid Flooring Installation

The hybrid flooring installation is a floating floor that uses a click-lock system. This means you can simply click each plank into place and then slot them together. The hybrid flooring installation does not have seams once it is in place. It can also be removed with relative ease if needed.

You should hire floor sanding professionals for better work which will help you understand the importance need of floor sanding.


Scoopearth Team

0 Comments

Your email address will not be published.