Before tackling your kitchen faucet installation, read our tips for a successful install. We’ll cover how to install a single-handle faucet, how to install a deck-mounted faucet, and how to check for leaks before the actual installation. Finally, we’ll go over how to estimate the costs. Whether you’re tackling the job yourself or hiring a contractor, we’ve got tips to make your job as smooth as possible.
Top 10 Kitchen Remodeling Ideas You Can Follow In 2021.
Table of Contents
Installing A Single Handle Faucet
When replacing a single handle kitchen faucet, the best approach is to match the current finish of the faucet with the existing mounting holes. If this is not possible, you can install the new faucet using a separate base plate that matches the finish of the new faucet and extends far enough to cover the existing holes. To begin, you must turn off the water valves in the sink and the faucet, and remove any mounting hardware.
After disconnecting the water supply lines, you can remove the old faucet. To do this, turn off the hot and cold-water valves located under the sink. Next, unplug the pull-out sprayer line from the faucet. Carefully pull the old faucet out of the sink, and then remove any old sealant with a putty knife. Be sure to wipe the area with a clean, heavy-duty sponge to remove any excess water.
Installing A Deck-Mounted Faucet
Since it is located on a countertop, installing a deck-mounted kitchen faucet is a relatively easy task. Most vanities and countertop slabs come with holes already drilled for the faucet shanks. Installation is simple, but you will need to make sure that you do not overtighten the nuts or you could strip the metal, which will make removal difficult. Before you begin, you should make sure that you know which lines will exit the wall under the sink.
There are several different types of faucets. The two most common types are deck-mounted and wall-mounted faucets. Deck-mounted faucets are typically mounted on a deck, while wall-mounted faucets require that you open the wall behind the sink to install them. Installing a wall-mounted faucet will require more plumbing, and you may want to call a plumber to install it. Choosing the right type of faucet for your home can make the installation process a simple one or a complex project.
Checking For Leaks Before Installing A Kitchen Faucet
One way to make sure you don’t have a leaky faucet is to check for them before you install them. Some people simply notice a drip on the faucet and tighten the knob to fix it. That doesn’t fix the problem, because leaks can also occur at the base of the faucet. To determine the source of the leak, you should first disassemble the faucet and examine its seals and fittings.
You can check the aerator and the seal by applying some dish soap to the faucet. This soap also contains small amounts of food coloring, making it easy to spot leaks. Next, you need to turn the water on and look for leaks around the connections and seals. If you’ve gotten lucky, you may notice that you can see a leak while running the water. If you see water stains on the sink or countertops, this is probably a leak.
Cost Of Installing A Kitchen Faucet
If you want a new kitchen faucet services but aren’t sure how to go about doing it, the costs of installation vary from $100 to $400. This cost is largely dependent on the type of faucet you choose and the condition of the existing faucet. Some faucets require additional work, so you may have to hire a plumber to get the job done correctly. You can also try to do the job yourself, but you should be sure you know how to do it so you don’t encounter any problems.
If you’re doing it yourself, the average job takes approximately two hours, plus an additional trip to the store. On the other hand, hiring a plumber will cost between $250 and $500. This cost will vary, depending on the type of faucet you’re installing and the length of the job. If you hire a plumber, you should expect to pay more for the labor, as the plumber will remove the old faucet and replace it with the new one.