There are several different types of pumps, including Stationary, Boom, Line, and Trailer-mounted models. We’ll look at some of their differences and advantages, as well as their limitations. A good rule of thumb is to stick to a slump between 50 and 100 mm. anything below 50 mm is difficult to pump, while anything over 100 mm will likely block the hose or delivery pipe. You should also keep in mind that the maximum size of crushed or rounded aggregate is limited to 40% of the diameter of your hose or delivery pipe.
Table of Contents
Stationary pumps
When Concrete Pumping Charleston SC, there are two main types available: line pumps and stationary pumps. The former is used to pump concrete over small areas, such as sidewalks and slabs. Stationary pumps are ideal for pouring concrete in hard-to-reach areas or to change the location of pouring. Both types of pumps have different uses. Line pumps are designed to pump concrete in large quantities, while stationary pumps are used to pump small amounts.
The stationary type of pump is less maneuverable than boom pumps. They are attached to a truck or trailer and must be steered into the desired location. While they can deliver large quantities of concrete, they do so at a slower pace. They are recommended for smaller construction projects. And, because stationary pumps are less maneuverable than boom pumps, they are also more expensive than boom pumps. In addition, they can pour concrete more slowly than boom pumps.
Boom pumps
Boom pumps are useful in projects where a building or structure has a high elevation or a long reach. These pumps allow workers to complete the work with ease and speed, preventing delays and hardening of the concrete. These pumps also allow construction crews to work on multiple levels, such as parking garages, without the need for additional labor. Here are several of the most common uses of these pumps:
Placing booms are used for slab pours, ground-level placements, and remote placements. These pumps have a boom mounted on a pedestal, which may be hundreds of feet away from the pump. The boom can also be mounted on a crane tower, cross-frame, or side mount. When used in remote areas, they use wedges to insert the boom into the floor slab. This allows workers to place concrete without compromising their safety.
Line pumps
Boom and line pumps are two different kinds of concrete pumps. Boom pumps have an additional attachment called a boom, which allows them to reach higher heights. A boom pump can reach as high as 16 feet in the air and 80 feet in the sky, whereas line pumps have hoses that can reach up to 1500 feet. Boom pumps are typically used for large-scale commercial projects, while line pumps are more suited for smaller residential projects.
Line pumps for concrete are generally larger than boom pumps. They can be pulled by a truck and are easier to maneuver. A hose attaches to the outlet of a line pump. These pumps are usually used for smaller residential jobs and for projects where a boom pump is too large. Depending on the volume of concrete that you’re pumping, a trailer-mounted pump can cost anywhere from $90,000 to $175,000 depending on the size.
Trailer-mounted pumps
Unlike ordinary, stationary concrete pumps, trailer-mounted concrete pumps are mobile and can operate with ease on any construction site. The hydraulic system controls the cylinder pistons and swing arm of these trailer-mounted pumps. The hydraulic oil tank contains a large quantity of liquid hydraulic fluid and a port at the top is where the liquid force is delivered to the pump. Once the pump leaves the factory, it is filled with hydraulic oil, and this fluid is used to control the pumping state.
Conclusion
Compared with traditional Concrete Pumping Charleston, trailer-mounted pumps for construction can reach greater heights and depths. The pump’s design is versatile and allows it to operate at multiple pipelines. Its automatic lubrication system helps to maintain the efficiency of the pump and compensates for wear clearance automatically. The pump is also easier to transport. It is also designed to be easily accessible and feed concrete mixers continuously. Besides, the trailer-mounted pump can reach heights and lengths that are difficult to access with other types of pumps.
