It is critical to keep your solar hot water system working at peak efficiency. On low sun days, when we have seasonal fluctuations, or when there is a larger demand on the system than typical, most systems will require a little amount of electrical boosting. Aside from these uncontrolled aspects, there are other factors that must be maintained and serviced to ensure the longevity and peak performance of your solar hot water system Central Coast. Click for source to know more:
The simplest and most straightforward thing you can do
Making ensuring the panels are clean is the simplest and most straightforward thing you can do. Mold and leaf buildup on the panels will have a significant impact on the functioning of your hot water system.
Water runs slowly through the panels, and silt can accumulate over time; flushing the panels is a crucial step in maintaining your panels, especially in locations where water quality is a concern.
The majority of systems on the market are made of steel with a glass vitreous lining and are anode protected. The anode is a sacrificial component that is meant to corrode away in order to avoid corrosion of the tank itself. It is critical to inspect the anode to ensure that there is enough anode left to protect the tank; this should also be done every five years.
Every solar hot water system brand and model
Every make and type of solar hot water system, regardless of the materials used in construction, requires professional servicing every 5 years. The valve manufacturers that make hot water pressure and temperature safety valves require the valve to be replaced every 5 years. Ensuring that valves are working correctly and within the specifications specified by the manufacturer not only extends the life of your system but also maintains it running at top efficiency.
Hot water systems should also be equipped with an anti-scolding device; however, this is not always present (as we have seen on too many installations), and we strongly recommend that you have one installed. This will not only protect your family from scalding water coming out of your taps but will also regulate the temperature of your water, giving your solar hot water system better performance. Every 5 years, this should be tested for operational defects and performance by a competent service.
You may even notice a decrease in system performance if the insulation has come loose from the pipes or has begun to disintegrate.
Finally, if you get the sense that your hot water system is not operating properly,
● Your anti-scolding device has either stopped working or has been configured incorrectly.
● If the hot water valve has a leak,
● The panels have become filthy.
● Sediment is accumulating inside the panels.
● If any insulation has begun to disintegrate or is missing, replace it.Conclusion:- Other items your solar hot water specialist should look at are securing clamps and straps to ensure that it does not slide or move about in bad weather. This applies to both full systems and split systems. They should also inspect the waterproofing and silicone sealants surrounding pipes that pierce the roof, as birds have been known to gnaw at these.
