Sometimes, everything is fine with your floor lamps, and suddenly, it goes off. You begin to wonder what is wrong or what are the faults in a lamp. When you have a lamp that begins to fail you, surely you start to look at it from top to bottom to find out what is happening and why this is happening since this problem does not always happen.
In this article, we will discuss the problem that may cause your table or floor lamp to go off and how to fix it. In addition, we will point you to where you can get durable liquidation lamps that won’t disappoint you.
General Reasons why your floor lamps fail
In general, when a lamp fails, the problems may be:
- In the socket: Have you tried turning it on in another socket other than the usual one? If it keeps failing, it may not be the plug, so you can look at something else.
- On the cable for lamps: If the cable is already badly bent or scratched, this could be failing. Try moving it to see if it turns on or off. If so, you will have to change the cable for another.
- The switch: If your lamp has a switch and it is bad or has been used a lot, you may need a new switch (not a new lamp).
- The lamp holder: Perhaps there needs to be a better connection, which is why the lamp does not shine well. The change of lamp holders usually works quite well.
- The bulb: It is perhaps the fastest to verify, but sometimes the bulbs are discarded, believing that this is the problem when it is not.
Steps before a short circuit
There are times when you are going to turn on the light, and suddenly, the floor lamp turns on and off or does not turn on at all. What happens? Well, it may be that the light has gone out, for which it would be necessary to check if all the switches are where they should be.
If so, and there is light, then it is time to look at what may have failed. Thus, the steps that would be taken would be:
- Come closer and tighten the bulb a little, holding the bulb with one hand and the lamp with the other to tighten it a bit in case it happens that it has given itself and is not making good contact.
- If that doesn’t work, and when you turn on the light, it’s still the same, you have to see if the light bulb isn’t blown. You can prove that by looking at it or trying it in another place where there is light.
- If that is the problem, put a new light bulb and try again, and if not, go up some stairs and look at the ceiling cables in case they have become loose or disconnected. For that, a cable tester is a little machine that can tell you.
- In the event that they are not the cables either, it would be necessary to try the switch because it does not receive enough electricity to make contact.
If turning on the table lamp, there is a spark, and the light goes out. The reason is that the lamp holder or the bulb has communicated for an instant and made a short circuit. This can only be solved by changing the pieces that have broken. Otherwise, you would have to get a new table lamp that is made of quality that doesn’t wear out easily and stays strong for a long time.
Conclusion
Several floor lamps are available on the market and are a product from several companies. However, not all products are made with high-quality materials. So, when you want to buy new liquidation lamps, you must be picky in your selection, or better still, you can buy from reputable stores like A and J Liquidation. We specialize in selling lamps, floor lamps, table lamps, and all home decor to help beautify your living space.
