The BrosTrend WiFi Range Extender is a device that helps expand your wireless network’s range. It extends the signal from your router and connects to it via an Ethernet cable, allowing you to use your wireless devices in areas of your home or office where they wouldn’t normally work. The BrosTrend WiFi extender setup can also help eliminate dead spots in a large building. However, this device does require some setup in order for it to work properly. Below, we’ll explain how you can set up and troubleshoot issues with your brostrend wifi booster:
Table of Contents
How to set up the Password of BrosTrend WiFi Extender?
When you perform Brostrend setup steps, you also need to set up the password of your brostrend.
To set up the password of your brostrend, follow these steps:
- Open the app on your mobile device. You will see two options – one for connecting and one for setting up a new network. Click on “Set Up A New Network”.
- Enter a name for this network and click “Save” in order to save it as an existing network or enter a new name if you want to create a new one from scratch by clicking on “Connect To”.
- Now enter any name that you wish before clicking “Save” after entering it in all fields
- Then click “Connect To” again followed immediately by checking whether everything works properly with no problems.
How do I Change or Reset the Password of BrosTrend WiFi Extender?
During or after the brostrend wifi extender setup, you might need to reset your password. To change the password of your BrosTrend WiFi extender, follow these steps:
- Power on your device by plugging it into a power source or removing the battery from the back of the extender if you have a battery model.
- This will turn on your extender’s Wi-Fi network.
- Now, you can access it from any device with Internet connection (e.g., laptop).
- Log in to your router using an administrator account and navigate to ‘Wireless Settings’ or ‘Wireless Network’.
- Note down your current Wi-Fi SSID name as well as its password. Make note of them somewhere safe so that you can use them later.
- This way, if something goes wrong while changing those settings later on.
- You won’t have trouble accessing your home network again once after this.
What should I do if I can’t Connect to the BrosTrend WiFi extender?
- Check the WiFi settings on your device.
- Open the Settings app and tap or click Network & Internet > Mobile & Sim Card.
- Tap or click Advanced options > More > Wi-Fi Calling > Off (if it’s on).
- Tap or click Advanced options > More > Tethering & portable hotspot > Off (if it’s on).
- Check the settings on re.brostrend.com.
No Internet Connection – Solution
What should I do if there is no internet connection through my BrosTrend WiFi extender?
- Check that the Ethernet cable is connected to both the WiFi network and your computer.
- If you are using a laptop, check both the WiFi signal and its power adapter.
- Check your router and modem to ensure they are receiving an internet connection from an ISP.
- If you have a DSL or cable modem, check that it has not been disabled by other users on your WiFi network.
- If you have a wireless router with multiple antennas, try moving these away from each other to avoid interference between them.
How do I Connect to a 5GHz Network With My BrosTrend WiFi adapter?
In most cases, you can connect to a 5GHz network by pressing the 5GHz button of the extender or router. In some cases, you may also have to press this button on your phone.
To connect to both 2.4GHz and 5GHz networks after pressing the Wi-Fi extender or router’s respective band button(s), follow these steps:
- On your phone, go into settings and select Wi-Fi
- Select the network with which you would like to connect
How do I Know Whether My Wireless Network is 2.4GHz or 5GHz?
The first step is to determine what type of network you have. If your router supports both 2.4GHz and 5GHz, you’ll see two separate networks. One with the name of your network, with “_2G” at the end. For example, NET_2G. The other one is named after your SSID that ends with “_5G”. For example NET_5G. If you only see a single network without any suffixes, it’s most likely 2.4GHz.
WiFi Signals But No Internet
What should I do if my Device shows the WiFi signal but the internet does not work?
If your device shows the WiFi signal but the internet does not work, there are some things you might want to check:
- Check the password. Ensure that you put in all of the correct information when setting up your extender.
- Check the router. Make sure that it is working properly and has a strong connection to your modem and internet provider.
- Check your Internet connection. Make sure you have good quality Wifi and cellular connection in order to connect with other devices online such as laptops or smartphones via wifi hotspot created by this Brostrend WiFi Extender.
How do I Find the WPS Button on my Router to Set up the BrosTrend WiFi Extender?
If you are setting up the extender manually, press the WPS button on your router. If a light comes on, then it is ready to connect with other devices. Now, press the WPS button on the BrosTrend WiFi extender and wait for its green light to turn on. When both lights come on, then your devices are connected to each other and you can start using them as a network!
What is WPS, and how does it work?
WPS (Wi-Fi Protected Setup) is a wireless security standard that allows you to connect devices to your router with a push of a button. WPS can be used with routers and wireless adapters designed to work with the WPS standard, and it’s often used in conjunction with the PIN function found on some routers.
When connecting a new device, you’ll need to press both the WPS button on your router and the corresponding button on your device at exactly the same time. If done correctly, both devices will quickly connect to one another via Wi-Fi Protected Setup (WPS). Once connected, they’ll automatically create an encrypted connection between themselves so that all data between them is transmitted securely over WiFi signals.
How many devices can the BrosTrend WiFi Range Extender support at most?
As with most things in life, the number of devices that you can use simultaneously with your WiFi range extender will depend on a few factors like the number and type of devices you have, as well as how far they are from the extender itself.
If you have a large number of devices that you use simultaneously (for example, several computers); then it is better to connect your computer via wired connection rather than using wireless connectivity. This is because this option gives you higher bandwidth and therefore better performance.
Know How to use your Brostrend WiFi Booster
Brostrend Wifi Extender is a small device which can be easily connected to the router and extends the range of your WiFi. It uses two antennas to transmit and receive data, thus providing faster wireless internet connectivity within a small range.
The device comes with an Ethernet cable connector at both ends so you can plug it directly into your computer or any other device that supports Ethernet connectivity. The Brostrend Wifi Extender also has an LED indicator on its front side which shows whether it is connected or not as well as whether there are any problems while using the device.
Key Takeaway
So that’s it for our BrosTrend WiFi Range Extender troubleshooting guide.We really hope you found this helpful and that you will be able to solve your wireless problems. Remember, if all else fails, leave a comment below and we’ll be more than happy to help out.
