Does your Netgear router keep on disconnecting? If yes, then it’s a severe headache. But you don’t need to worry as a similar kind of issue is reported by many Netgear router users. Therefore, to tackle the Netgear router keeps disconnecting issue, we have arrived with some basic troubleshooting methods to resolve the issue. Just scroll down to the below section, you might find the information useful.
Possible Solutions
Table of Contents
Reboot Your Netgear Router
Before implementing any other troubleshooting hacks, consider rebooting your Netgear router as it will resolve minor technical hiccups that might be causing the Netgear router keeps disconnecting issue. Just follow the instruction given below and learn how to reboot your Netgear router.
- First, you are required to disconnect all your connected WiFi-enabled devices from your Netgear router.
- Turn off your Netgear router and remove it from the power socket.
- Set it aside for some time before plugging your router into the power socket and turning it on.
- Now, connect your WiFi-enabled device to your router to enjoy high-speed internet services.
Verify Your Internet Connection
A stable internet connection is required for the Netgear router to work efficiently. If your networking devices are connected through a cable connection, then examine your Ethernet cable as it needs to be free from any kind of damage. If you detect any kind of damage, then replace it with the new one. For a wireless connection, always make sure that your WiFi-enabled devices are getting proper WiFi signals. If that’s not the case, then relocate your WiFi-enabled device close to your Netgear router to avoid any kind of loss of connection.
Important Note: For the best result, always prefer a wired connection while accessing the Netgear Nighthawk router login page.
Avoid WiFi Interference
Always avoid placing your Netgear router close to the refrigerators, microwaves, cordless phones, Bluetooth speakers, and other home smart appliances as these objects use radio signals for transmission. And it can disrupt the Wifi signal resulting in poor internet connection and can lead to the Netgear router keeps disconnecting issue.
Update Netgear Router Firmware
Using an updated version of Netgear router firmware can limit the occurrence of any kind of issue. If that’s not the cause, then upgrade it to the latest version of Netgear router firmware. However, many users aren’t aware of the proper steps to upgrade the firmware of the Netgear router. So, to make things simple, we have arrived with detailed information to upgrade your Netgear router without any trouble.
To update:
- You are required to turn on your Netgear router and PC.
- On your PC, access the latest version of the internet browser and type 192.168.1.1 in the address bar.
- Hit the Enter button.
- You’ll be directed to the Netgear router login page where you need to insert the default username and password in their specific field.
- After entering the required credentials, click Log In.
- Once you have successfully logged in, the Netgear router setup wizard will come in the view where you need to browse your cursor to the Advanced tab, click Administration, and select the Firmware Update option.
- Next, you need to click the Check option to look for the new updates if available.
- If the new updates are available, click Yes to begin the update process.
- Now, simply follow the on-screen instructions to complete the Netgear router firmware update.
Now, check whether the Netgear router keeps disconnecting issue has been resolved. If not, then browse to the next method to fix the issue.
Reset Netgear Router
This is the last resort when nothing works for you. Resetting your Netgear router to the default factory settings will resolve all the minor or major technical issues that might occur with your Netgear router.
To reset:
- Seek for the Reset button located on your Netgear router.
- Once you have identified the Reset button, press and hold the button using pinpointed object until the power LEDs turned to solid green.
- Then, your router will automatically restart and will be restored to the default factory mode.
Now, re-configure your Netgear router using the default URL i.e. routerlogin.net to enjoy high-speed internet services.
Hopefully, by going through the above-mentioned troubleshooting methods, you will be able to resolve the Netgear router keeps disconnecting issue. If you know any other troubleshooting method to fix the Netgear router disconnecting issue that we forgot to mention here, then let us know by commenting below.
