If you are living in Karachi, you must have faced some electrical issues for sure. Sadly, there are many issues like voltage fluctuation, overcurrent, and undercurrent. Mostly, you need an electrician in Karachi to help with fault tracing diagnosis as it can’t be done by oneself.
If you want to do a DIY job, chances are that the work will lack finishing, or you might have to purchase additional equipment. In both cases, doing the electric work yourself might cost you more than what you spend on hiring an electrician. A good electrician can save you thousands of rupees by helping you diagnose, understand and rectify any electrical issues.
What is Fault Tracing Diagnosis?
Before you understand how a professional electrician can help you with fault tracing, you need to understand what it is.
In fault tracing diagnosis, an electrician will test the electrical equipment. Hence, he can determine if that equipment is safe for use. Moreover, if there is any problem with the equipment, he will find out why.
Can you make Fault Tracing Diagnosis at Home?
Undoubtedly, with a little help, you can find open circuit faults by yourself. Troubleshooting them is very easy. All you need to do is check the circuit.
When the circuit is not receiving proper voltage, it does not work properly. This can be seen by looking for loose connections, open operating coils, and even burned-out bulbs.
Remember, you need to be very careful when dealing with electricity. We always recommend turning off the power from the main source before troubleshooting any problem.
If you can’t seem to find what the problem is, it is advised to call a good electrician in Karachi. You can message us and get your appointment booked quickly.
On the other hand, short circuits are difficult to detect. Our professional electricians have years of experience behind them. Additionally, they know how to deal with insulation and circuit breaks.
3 Steps to in which an Electrician in Karachi Can help with Fault Tracing Diagnosis
There are three basic steps in which an electrician can help in fault trace diagnosis. These are explained below.
1. Collect and Analyze the Evidence
At times, common people can’t understand what the problem is. You might seem to think that the bulk goes out again and again because the bulbs you put in are not of good quality.
However, if something like this happens, it is always recommended to call a professional electrician. They will help in collecting evidence by thoroughly investigating what the problem is.
Next, the electrician will narrow and pinpoint where the exact problem is.
2. Determine and Remove the Cause
Once the electrician has analyzed what the cause of the fault is, it will be removed. If he does not remove the cause, the fault will keep on reoccurring.
Plus, he will see why the fault occurred in the first place. Maybe there is a voltage issue in the area; maybe the main panel breaker is not working properly, etc.
3. System Check
It is important to check the equipment, machine, and all other systems. The electrician will make sure everything is working fine.
Furthermore, the electrician will also check whether something else is wrong or not.
It is best to get a general inspection done every six months to one year.
Final Word
Electricity is something that needs to be dealt with very carefully. Not everyone should play around with it.
Hence, it is important to call upon a good electrician in Karachi when you are facing any serious or minor electrical issues. They can help you in tracing and diagnosing faults.
So, if you want to hire an electrician, leave us a message on the Service Expert, and we will get back to you!
