RC car racers have to make it a point that collision should be the last thing that can damage their vehicle. But, with the speed RC cars are capable of doing while on track, collision is a common scenario. If you are a newbie to handling RC cars as a hobby, there are some basics that you need to know. These basics are good for the type of RC vehicle that you own and for your own knowledge of RC racing.
First of all, shock absorbers, or as it is popularly known, shocks, keep the vehicle suspended parallel to the tires and ground below it. A good set of shocks assure the owner that the chassis of an RC car doesn’t touch the track nor does it cause the tires of the car to stray away. Keeping a good set of shock absorbers is the tricky part, so before entering any racing competition, test several sets of shocks that you think would be effective in keeping your RC car chassis off of the racetrack.
Shock Absorber
Everybody knows that shock absorbers consist of a good set of springs as this allows the car to maintain the standard height from 0 levels. For better performance though, a soft type of spring is preferred. As mentioned, it is better for you to test several springs at a time before entering a competition. You’ll be the judge of the height of the chassis from the ground and whether the “feel” of the spring already suffices your preference.
To put your RC car under smooth control even if it bumps another car on track or experiences an ordinary bump, be sure you have the right amount of shock oil absorbed on the springs of the car. An appropriately positioned pistons absorb the excess energy caused by a collision or impact. This results in the steady motion of a vehicle.
Keeping your RC car free from unsteady movement and unnecessary bounce will give you peace of mind when driving it around or even when in a competition.
Tranny Tubes
There is no movement in the car without transmission fluid. This is caused by a lack of power transfer from the engine to the axles. To inspect the transmission fluid, you must use a tranny tube or a shemale tube. Some tubes have additional features, such as a temperature display.
Automobiles are among the most practical modes of transportation. The majority of people, particularly in developed countries, own a car. If you enjoy driving, on the other hand, you should pay close attention to every detail. Transmission problems can occur whether you drive a manual or automatic vehicle. As a result, many of us are experiencing transmission fluid or transmission issues.
This article will assist you in locating the top ten tranny tubes (shemale tube).
Radio Controlled
Radio-controlled hobby cars are just like the real, life-size ones; they need regular check-ups, cleaning and tuning, and overall proper maintenance to guarantee good performance while on the tracks or whenever it is used.
You can simply use a denatured alcohol in cleaning your RC car(s) but be sure that it doesn’t get to any of the electronic parts of your car since this type of alcohol has a very strong solution which may be enough to damage parts of it. But if you want to go beyond just using denatured alcohol, you can try other products that may give you benefit though can also leave you spending more than the allotted budget.
There are still more options that you can take though so you don’t have to be stuck on spending a lot on solutions you wouldn’t be needing every day. Alcohol and a bottle of spray can do the trick. Air compressors are also great tools for cleaning your RC car. The thing with air compressors is that it blows off air to the RC car but it doesn’t do the entire maintenance needed for your car. If you don’t have an air compressor yet, better save up for it because it could cost around $65 – 69 at the market price. But if you already have one, then, better.
A combination of a green alcohol solution and an ordinary rubbing alcohol with the aid of an engine cleaning tool can help with the maintenance of your RC car. As for engine sprayers, all you need is a simple green solution, water, and a small amount of alcohol. Keep the proportion 5:1 for the simple green to water. The idea while you use an engine cleaner is to make sure that the sprayer targets the area with bearings and the bearings to the wheels.
Conclusion
Make sure also that you don’t spray much of the solution on the car to avoid damage to the electronic parts. You can do this and even conserve the use of the cleaning solution by allowing the very little solution to come out of the sprayer.
