Wireless network behaving sluggish? It is not a new issue as a number of people face these issues daily. But wifiwavlink.net can resolve almost in all ways. The wireless interface security mode is maybe not stable or it can be a compatibility issue and so on. But no worries as there are a number of troubleshooting tips, given to help you.
We are providing solutions on these issues:
1. Web interface
2. Why does Extender cause problems?
3. WiFi Extender not working?
4. How to reset
But before we start with the solutions above, just make sure that the wire network is stable.
Web interface
Connect the extender and confirm. You can connect it either by physically connecting the Ethernet to port or you can set a unique SSID or connect the extender.
1. Firstly you need to check whether the IP address in the given steps is referring to your device or OS.
2. If you want to inquire on the router communication then you can ping the gateway possibly.
3. If the efforts of pinging to a website like google.com or yahoo.com will be successful, it means the connection is successful and working back again.
4. But if only one of the two steps is successful like you were able to ping but no reply came it means the process is unsuccessful.
5. But you need to add a Mac extenders address to approve the MAC table to the router. However, you need to contact the router manufacturers for assistance as every router has different configurations.
Hence, the Web interface is successful so always make sure to Setup your web interface by the following steps.
Why Do Wi-Fi Extenders Stop Working?
Occasionally there can be a number of reasons behind WiFi extenders stopping working. However, there can be a number of reasons behind, like connection might not be available, or hardware is malfunctioning or the security connections are not in their places.
There could be a number of reasons markedly, that you are facing a number of issues for setting up the Wavlink extender Setup.
1. So Check whether the router is still connected to the WiFI extender.
2. There could be some of the additional WiFi networks broadcasting the WiFi extender. 5GHZ and 2GHZ network which possibly be ending with “EXT”
3. Click on the wireless network properties.
After completion of these steps and checking whether the network is connected and receiving and sending data. As a result you should patiently follow the next procedure.
Lights and buttons.
1. Check the WiFi extender unit, whether the connection is physical or not.
2. Make sure that the data lights on the device are green.
3. Check whether the wireless signal strength light on the Wavlink router login is visible.
4. Markedly, if the Extender has lost the connection, with the router it will turn either black or amber.
5. Press the WPS button which is located on the top of the router.
6. Notably, don’t forget to press the WPS button on the extender.
7. As a result the connection will be re-established.
Can Wi-Fi Extenders Cause Problems?
On many parameters you can judge if the device is having technical bugs. Momentarily you can work on them. But there will always be signs that help you tell whether what is actually causing a problem.
· Frequently need to reconnect– If you are losing the signals constantly, it might be possible that your extender is falling.
· Inconsistent or low internet speed– The internet speed plays a vital role, if the internet speed is constantly poor or slower than the usual, as the WiFi extender rebroadcasts the signals so that the internet speed should be good. The slow internet is the only reason you are facing problems like dropping of downloads and the WiFi extender signals.
· The WiFi Extenders will not turn on- if there will be any fault in the WiFI extender. The extender will lose the power connection with the extender. As this is the easiest way to Setup the Wavlink WiFi Extender Setup.
If these tips aren’t helping then go for a reset
1. Press the reset button on the extender.
2. Using a pin or a needle press hard on the reset button for at least 10-15 seconds.
3. The Wavlink router login will start blinking suddenly, if the default setting is reset.
4. Now, finally wait for a minute after pressing the button and leave.
5. Henceforth, connect the computer to the web browser. After accessing it.
I hope the Wavlink WiFi extender is accessible now.
